Constraint effects on fracture toughness of ductile cast iron in the ductile regime

被引：1
|
作者：
Lindqvist, S. [1 ]
Kuutti, J. [1 ]
Sirkia, L. [1 ]
Forsstrom, A. [1 ]
机构：
[1] VTT, Kemistintie 3, Espoo 02660, Finland
来源：
ENGINEERING FRACTURE MECHANICS | 2024年 / 306卷
关键词：
Ductile cast iron; Constraint; J -R curve; Fracture toughness; RESISTANCE CURVES; SCALE; DCI;
D O I：
10.1016/j.engfracmech.2024.110202
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
To assess the effect of constraint loss on fracture toughness of ductile cast iron (DCI), GJS-400-15, in the ductile regime at 0 degrees C, the fracture toughness was characterised with two different types of fracture toughness specimens, compact tension (C(T)) and single edge tension (SE(T)) specimens. The constraint state in the specimens was quantified using finite element analysis. Overall, the constraint dependence of fracture toughness for DCI is comparable to typical ferritic structural steels. For the obtained J-R curves, the fracture toughness increases as the crack grows, and the crack growth is stable on macroscopic scale up to J = 290 kJ/m2. Independent of the constraint state in the stable crack growth regime, the global failure mechanism is ductile fracture, including occasional local brittle areas.
引用
收藏
页数：18
相关论文
共 50 条
  • [31] Fracture toughness of bainite ductile iron obtained by continuously quenching
    Wei, Bingqing
    Liang, Ji
    Wu, Dehai
    Fu, Chengsong
    Gu, Chen
    Dong, Manlin
    Qinghua Daxue Xuebao/Journal of Tsinghua University, 1999, 39 (02): : 46 - 48
  • [32] Embrittlement characteristics of fracture toughness in ductile iron by contact with water
    Komatsu, S
    Zhou, CQ
    Shibutani, S
    Tanaka, Y
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 1999, 11 (06) : 539 - 544
  • [33] Investigations on the fracture toughness of austempered ductile iron alloyed with chromium
    Rao, PP
    Putatunda, SK
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 346 (1-2): : 254 - 265
  • [34] The effect of testing temperature on fracture toughness of austempered ductile iron
    Hsu, CH
    Lee, SC
    Feng, HP
    Shy, YH
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (02): : 295 - 303
  • [35] Special issue on fracture toughness of steel in the ductile to brittle transition regime
    Heerens, J
    ENGINEERING FRACTURE MECHANICS, 2002, 69 (04) : 419 - 420
  • [36] The technology of high toughness ductile iron cast based on green manufacturing
    Hou, Jihong
    Meng, Chao
    ELECTRICAL INFORMATION AND MECHATRONICS AND APPLICATIONS, PTS 1 AND 2, 2012, 143-144 : 499 - 502
  • [37] FRACTURE-TOUGHNESS AND FATIGUE FRACTURE OF RARE EARTH MAGNESIUM DUCTILE IRON
    XU, C
    YU, RZ
    INTERNATIONAL CAST METALS JOURNAL, 1979, 4 (03): : 21 - 28
  • [38] Predicting the effect of constraint on cleavage and ductile fracture toughness using area contour toughness scaling
    Seal, C. K.
    Sherry, A. H.
    ENGINEERING FRACTURE MECHANICS, 2017, 186 : 347 - 367
  • [39] Effects of austempering heat treatment conditions on fracture through of austempered ductile cast iron
    Sugiyama, Y.
    Arai, M.
    Imono, 1996, 68 (03): : 216 - 221
  • [40] FRACTURE TOUGHNESS TESTING OF DUCTILE IRONS
    NISKANEN, J
    INTERNATIONAL CAST METALS JOURNAL, 1977, 2 (03): : 20 - 22
12345