Influence of tool shape on formation behavior of intermetallic compounds during dissimilar friction stir welding of steel and aluminum alloy

被引：0
|
作者：
Tanaka T. [1 ]
Nezu M. [1 ]
Uchida S. [1 ]
Hirata T. [1 ]
机构：
[1] Metallic Materials Section, Osaka Research Institute of Industrial Science and Technology, 2-7-1 Ayumino Izumi-shi, Osaka
来源：
Keikinzoku/Journal of Japan Institute of Light Metals | 2020年 / 70卷 / 11期
关键词：
Diffusion mechanism; Dissimilar metal (aluminum alloy; steel); Friction stir welding (FSW); Intermetallic compound (IMC);
D O I：
10.2464/JILM.70.503
中图分类号：
学科分类号：
摘要：
The effect of the welding tool shape in dissimilar friction stir welding of steel and aluminum on the formation mechanism of the intermetallic compound was investigated. It was found that the heat input during FSW process could be controlled by the tool shape. In addition, the tool shape caused a difference in the IMC formation behavior near the shoulder, which was correlated with the amount of plastic deformation of steel. Arrhenius plots of the IMC formation behavior in various joining processes indicated that the rate constant increased with the strain rate of iron during the reaction process. © 2020 The Japan Institute of Light Metals
引用
收藏
页码：503 / 509
页数：6
相关论文
共 50 条
  • [31] Microstructural evolution during friction stir welding of dissimilar aluminum alloy to advanced high-strength steel
    Shuhuai Lan
    Xun Liu
    Jun Ni
    The International Journal of Advanced Manufacturing Technology, 2016, 82 : 2183 - 2193
  • [32] Material flow behavior during bobbin-tool friction stir welding of aluminum alloy
    Liu X.
    Li W.
    Gao Y.
    Wen Q.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2021, 42 (03): : 48 - 56
  • [33] Microstructural evolution during friction stir welding of dissimilar aluminum alloy to advanced high-strength steel
    Lan, Shuhuai
    Liu, Xun
    Ni, Jun
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 82 (9-12): : 2183 - 2193
  • [34] Mechanism of Weld Formation during Friction Stir Welding of Aluminum Alloy
    Selvaraj, M.
    Murali, Vela
    Rao, S. R. Koteswara
    MATERIALS AND MANUFACTURING PROCESSES, 2013, 28 (05) : 595 - 600
  • [35] Joining of aluminum alloy to steel by friction stir welding
    Watanabe, Takehiko
    Takayama, Hirofumi
    Yanagisawa, Atsushi
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 178 (1-3) : 342 - 349
  • [36] Underwater dissimilar friction stir lap welding of aluminum alloy and CFRTP
    Zhang, Yuan
    Sun, Yibo
    Liu, Yong
    Guan, Kainan
    Wei, Xiao
    Yang, Xinhua
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2024,
  • [37] Friction Stir Welding of T Joints of Dissimilar Aluminum Alloy: A Review
    Thakare, Shrikant B.
    Kalyankar, Vivek D.
    ADVANCES IN MECHANICAL DESIGN, MATERIALS AND MANUFACTURE, 2018, 1943
  • [38] Particle simulation of nugget formation process during steel/aluminum alloy dissimilar resistance spot welding and thickness estimation of intermetallic compounds
    Chikuchi, Shinnosuke
    Shigeta, Masaya
    Komen, Hisaya
    Tanaka, Manabu
    WELDING INTERNATIONAL, 2022, 36 (07) : 434 - 442
  • [39] Study on dissimilar joining of aluminum and steel sheet by friction stir welding
    Tanaka, T., 1600, Japan Light Metal Welding and Construction Assoc., 3-37-23 Kanda-Sakuma-cho, Chiyoda-ku, Tokyo, 101, Japan (50):
  • [40] Particle simulation of nugget formation process during steel/aluminum alloy dissimilar resistance spot welding and thickness estimation of intermetallic compounds
    Chikuchi S.
    Shigeta M.
    Komen H.
    Tanaka M.
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2021, 39 (04): : 371 - 378
12345