Influence of tool shape on formation behavior of intermetallic compounds during dissimilar friction stir welding of steel and aluminum alloy

被引：0
|
作者：
Tanaka T. [1 ]
Nezu M. [1 ]
Uchida S. [1 ]
Hirata T. [1 ]
机构：
[1] Metallic Materials Section, Osaka Research Institute of Industrial Science and Technology, 2-7-1 Ayumino Izumi-shi, Osaka
来源：
Keikinzoku/Journal of Japan Institute of Light Metals | 2020年 / 70卷 / 11期
关键词：
Diffusion mechanism; Dissimilar metal (aluminum alloy; steel); Friction stir welding (FSW); Intermetallic compound (IMC);
D O I：
10.2464/JILM.70.503
中图分类号：
学科分类号：
摘要：
The effect of the welding tool shape in dissimilar friction stir welding of steel and aluminum on the formation mechanism of the intermetallic compound was investigated. It was found that the heat input during FSW process could be controlled by the tool shape. In addition, the tool shape caused a difference in the IMC formation behavior near the shoulder, which was correlated with the amount of plastic deformation of steel. Arrhenius plots of the IMC formation behavior in various joining processes indicated that the rate constant increased with the strain rate of iron during the reaction process. © 2020 The Japan Institute of Light Metals
引用
收藏
页码：503 / 509
页数：6
相关论文
共 50 条
  • [21] Numerical Prediction of Intermetallic Compounds Thickness in Friction Stir Welding of Dissimilar Aluminum/Magnesium Alloys
    Chunliang Yang
    Chuansong Wu
    Junjie Zhao
    Acta Metallurgica Sinica (English Letters), 2021, 34 : 1375 - 1385
  • [22] Friction stir welding of aluminum alloy to steel
    Kimapong, K
    Watanabe, T
    WELDING JOURNAL, 2004, 83 (10) : 277S - 282S
  • [23] Numerical Prediction of Intermetallic Compounds Thickness in Friction Stir Welding of Dissimilar Aluminum/Magnesium Alloys
    Chunliang Yang
    Chuansong Wu
    Junjie Zhao
    Acta Metallurgica Sinica(English Letters), 2021, 34 (10) : 1375 - 1385
  • [24] Numerical Prediction of Intermetallic Compounds Thickness in Friction Stir Welding of Dissimilar Aluminum/Magnesium Alloys
    Yang, Chunliang
    Wu, Chuansong
    Zhao, Junjie
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2021, 34 (10) : 1375 - 1385
  • [25] Study of plastic flow on intermetallic compounds formation in friction welding of aluminum alloy to stainless steel
    Zhang, Da
    Qin, Guoliang
    Geng, Peihao
    Ma, Hong
    JOURNAL OF MANUFACTURING PROCESSES, 2021, 64 (64) : 20 - 29
  • [26] Subshoulder formation during friction stir welding of steel using tungsten alloy tool
    Pradeep, A.
    Muthukumaran, S.
    Dhanush, P. R.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2013, 18 (08) : 671 - 679
  • [27] Refill friction stir spot welding of dissimilar aluminum alloy and AlSi coated steel
    Ding, Y.
    Shen, Z.
    Gerlich, A. P.
    JOURNAL OF MANUFACTURING PROCESSES, 2017, 30 : 353 - 360
  • [28] A Correlation between the Ultimate Shear Stress and the Thickness Affected by Intermetallic Compounds in Friction Stir Welding of Dissimilar Aluminum Alloy-Stainless Steel Joints
    Picot, Florent
    Gueydan, Antoine
    Martinez, Mayerling
    Moisy, Florent
    Hug, Eric
    METALS, 2018, 8 (03)
  • [29] Investigations on the effects of friction stir welding parameters on intermetallic and defect formation in joining aluminum alloy to mild steel
    Dehghani, M.
    Amadeh, A.
    Mousavi, S. A. A. Akbari
    MATERIALS & DESIGN, 2013, 49 : 433 - 441
  • [30] Influence of tool pin design on properties of dissimilar copper to aluminum friction stir welding
    Mehta, Kush P.
    Badheka, Vishvesh J.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2017, 27 (01) : 36 - 54
12345