Tensile characteristics of metal filled 3D printed PLA based polymer composites

被引：0
|
作者：
D. L. Vinay [1 ]
R. Keshavamurthy [2 ]
G. Ugrasen [3 ]
机构：
[1] Dayananda Sagar Academy of Technology and Management,Faculty of Mechanical Engineering
[2] Dayananda Sagar College of Engineering,Faculty of Mechanical Engineering
[3] B.M.S. College of Engineering,Department of Mechanical Engineering
来源：
Interactions | / 245卷 / 1期
关键词：
PLA-based 3D printed polymer composites; Aluminium powder reinforcement particles; Fused deposition modeling; Microstructure; Mechanical characteristics; Fracture morphology;
D O I：
10.1007/s10751-024-01983-1
中图分类号：
学科分类号：
摘要：
This study examines the effect of steel particle reinforcement on the mechanical properties of polylactic acid (PLA) composites manufactured using fused deposition modelling (FDM). The study aims to determine how steel powder integration improves the material's performance for engineering applications. Microstructural characterization was carried out using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDAX), with twin screw extrusion ensuring a uniform blend of PLA and steel powder. The homogenised mixture was then used to 3D print specimens for tensile strength testing, and the significance of the results was determined using analysis of variance (ANOVA).
引用
收藏
相关论文
共 50 条
  • [41] 3D printed biodegradable composites: An insight into mechanical properties of PLA/chitosan scaffold
    Singh, Sunpreet
    Singh, Gurminder
    Prakash, Chander
    Ramakrishna, Seeram
    Lamberti, Luciano
    Pruncu, Catalin, I
    POLYMER TESTING, 2020, 89
  • [42] Mechanical, physical, and degradation properties of 3D printed PLA plus Mg composites
    Zeynivandnejad, Milad
    Moradi, Mohsen
    Sadeghi, Alireza
    JOURNAL OF MANUFACTURING PROCESSES, 2023, 101 : 234 - 244
  • [43] 3D printed continuous carbon fiber reinforced PLA composites: A short review
    Valvez, S.
    Santos, P.
    Parente, J. M.
    Silva, M. P.
    Reis, P. N. B.
    1ST VIRTUAL CONFERENCE ON STRUCTURAL INTEGRITY (VCSI1), 2020, 25 : 394 - 399
  • [44] Experimental evaluation of the mechanical and thermal properties of 3D printed PLA and its composites
    Vinyas, M.
    Athul, S. J.
    Harursampath, D.
    Thoi, T. Nguyen
    MATERIALS RESEARCH EXPRESS, 2019, 6 (11)
  • [45] Development and Characterization of 3D Printed Multifunctional Bioscaffolds Based on PLA/PCL/HAp/BaTiO3 Composites
    Mystiridou, Emmanouela
    Patsidis, Anastasios C.
    Bouropoulos, Nikolaos
    APPLIED SCIENCES-BASEL, 2021, 11 (09):
  • [46] 3D printed fiber reinforced polymer composites - Structural analysis
    Mohammadizadeh, M.
    Imeri, A.
    Fidan, I
    Elkelany, M.
    COMPOSITES PART B-ENGINEERING, 2019, 175
  • [47] 3D Printed Polymer Composites for CO2 Capture
    Du Nguyen
    Murialdo, Maxwell
    Hombostel, Katherine
    Pang, Simon
    Ye, Congwang
    Smith, William
    Baker, Sarah
    Bourcier, William
    Knipe, Jennifer
    Aines, Roger
    Stolaroff, Joshuah
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2019, 58 (48) : 22015 - 22020
  • [48] 3D Printed Graphene and Graphene/Polymer Composites for Multifunctional Applications
    Wu, Ying
    An, Chao
    Guo, Yaru
    MATERIALS, 2023, 16 (16)
  • [49] Effects of the Chitosan Source on the Properties of 3D Printed Polymer Composites
    Ayers, Lyndsay C.
    Johnson, Rebecca M.
    Tolfree, Ariel R.
    Al Kharji, Noora M.
    Senarathna, Milinda C.
    Arora, Niyati
    Smaldone, Ronald A.
    ACS APPLIED POLYMER MATERIALS, 2025, 7 (04): : 2644 - 2651
  • [50] Stereolithography-based 3D printed photosensitive polymer/boron nitride nanoplatelets composites
    Bustillos, Jenniffer
    Montero-Zambrano, Daniela
    Loganathan, Archana
    Boesl, Benjamin
    Agarwal, Arvind
    POLYMER COMPOSITES, 2019, 40 (01) : 379 - 388
12345