Tensile characteristics of metal filled 3D printed PLA based polymer composites

被引：0
|
作者：
D. L. Vinay [1 ]
R. Keshavamurthy [2 ]
G. Ugrasen [3 ]
机构：
[1] Dayananda Sagar Academy of Technology and Management,Faculty of Mechanical Engineering
[2] Dayananda Sagar College of Engineering,Faculty of Mechanical Engineering
[3] B.M.S. College of Engineering,Department of Mechanical Engineering
来源：
Interactions | / 245卷 / 1期
关键词：
PLA-based 3D printed polymer composites; Aluminium powder reinforcement particles; Fused deposition modeling; Microstructure; Mechanical characteristics; Fracture morphology;
D O I：
10.1007/s10751-024-01983-1
中图分类号：
学科分类号：
摘要：
This study examines the effect of steel particle reinforcement on the mechanical properties of polylactic acid (PLA) composites manufactured using fused deposition modelling (FDM). The study aims to determine how steel powder integration improves the material's performance for engineering applications. Microstructural characterization was carried out using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDAX), with twin screw extrusion ensuring a uniform blend of PLA and steel powder. The homogenised mixture was then used to 3D print specimens for tensile strength testing, and the significance of the results was determined using analysis of variance (ANOVA).
引用
收藏
相关论文
共 50 条
  • [31] 3D printed high-performance flexible strain sensors based on carbon nanotube and graphene nanoplatelet filled polymer composites
    Dong Xiang
    Xuezhong Zhang
    Zhuohang Han
    Zixi Zhang
    Zuoxin Zhou
    Eileen Harkin-Jones
    Jie Zhang
    Xia Luo
    Ping Wang
    Chunxia Zhao
    Yuntao Li
    Journal of Materials Science, 2020, 55 : 15769 - 15786
  • [32] 3D printed high-performance flexible strain sensors based on carbon nanotube and graphene nanoplatelet filled polymer composites
    Xiang, Dong
    Zhang, Xuezhong
    Han, Zhuohang
    Zhang, Zixi
    Zhou, Zuoxin
    Harkin-Jones, Eileen
    Zhang, Jie
    Luo, Xia
    Wang, Ping
    Zhao, Chunxia
    Li, Yuntao
    JOURNAL OF MATERIALS SCIENCE, 2020, 55 (33) : 15769 - 15786
  • [33] Tensile failure study of 3D printed PLA using DIC technique and FEM analysis
    Sabik, A.
    Rucka, M.
    Andrzejewska, A.
    Wojtczak, E.
    MECHANICS OF MATERIALS, 2022, 175
  • [34] Tensile properties of 3D printed continuous fiberglass reinforced cellular composites
    Mathur, Kavita
    Kabir, S. M. Fijul
    Seyam, Abdel-Fattah M.
    JOURNAL OF THE TEXTILE INSTITUTE, 2022, 113 (01) : 60 - 69
  • [35] Layer combination of similar infill patterns on the tensile and compression behavior of 3D printed PLA
    Aboelella, Menna G.
    Ebeid, Samy J.
    Sayed, Moustafa M.
    SCIENTIFIC REPORTS, 2025, 15 (01):
  • [36] Analysis of the Impact of Cooling Lubricants on the Tensile Properties of FDM 3D Printed PLA and PLA plus CF Materials
    Hozdic, Elvis
    Hasanagic, Redzo
    POLYMERS, 2024, 16 (15)
  • [37] Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
    Tian, Xiaoyong
    Liu, Tengfei
    Yang, Chuncheng
    Wang, Qingrui
    Li, Dichen
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2016, 88 : 198 - 205
  • [38] Tuning mechanical properties of 3D printed composites with PLA:TPU programmable filaments
    Darnal, Aryabhat
    Shahid, Zaryab
    Deshpande, Himani
    Kim, Jeeeun
    Muliana, Anastasia
    COMPOSITE STRUCTURES, 2023, 318
  • [39] Conductive 3D printed PLA composites: On the interplay of mechanical, electrical and thermal behaviours
    Tirado-Garcia, I
    Garcia-Gonzalez, D.
    Garzon-Hernandez, S.
    Rusinek, A.
    Robles, G.
    Martinez-Tarifa, J. M.
    Arias, A.
    COMPOSITE STRUCTURES, 2021, 265
  • [40] Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
    Tian, Xiaoyong
    Liu, Tengfei
    Wang, Qingrui
    Dilmurat, Abliz
    Li, Dichen
    Ziegmann, Gerhard
    JOURNAL OF CLEANER PRODUCTION, 2017, 142 : 1609 - 1618
12345