Effect of infill density and infill pattern on the mechanical properties of 3D printed PLA parts

被引：0
|
作者：
Ambati, Shivani Sriya [1 ]
Ambatipudi, Ravindra [1 ]
机构：
[1] MLR Inst Technol, Dept Mech Engn, Hyderabad 500043, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2022年 / 64卷
关键词：
Fused deposition modeling (FDM); 3D printing; PLA; Tensile strength; Infill density;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
3D printing is one of the fast-growing technology widely used all over globe. Fused deposit modeling (FDM) is one of the 3D printing technologies which creates physical objects from CAD models with the help fused thermoplastic filaments of Poly (lactic) acid (PLA), Acrylonitrile Butadiene Styrene (ABS), etc. The goal of this study is to see how 3D printing parameters such as infill density and infill pattern effect the mechanical properties of Poly Lactic Acid (PLA). At 3 different infill densities (60%,75% and 90%) and 3 infill patterns (grid, triangle and gyroid), 3D printed PLA parts are examined for tensile strength measurements and the optimized parametric conditions are identified. Copyright (c) 2022 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the International Conference on Advanced Materials for Innovation and Sustainability.
引用
收藏
页码：804 / 807
页数：4
相关论文
共 50 条
  • [21] Investigation of mechanical properties of PLA printed materials under varying infill density
    Gunasekaran, K. N.
    Aravinth, Vishaal
    Kumaran, C. B. Muthu
    Madhankumar, K.
    Kumar, S. Pradeep
    MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 1849 - 1856
  • [22] Effect of variable infill density on mechanical behaviour of 3-D printed PLA specimen: an experimental investigation
    Md. Qamar Tanveer
    Abid Haleem
    Mohd Suhaib
    SN Applied Sciences, 2019, 1
  • [23] Effect of variable infill density on mechanical behaviour of 3-D printed PLA specimen: an experimental investigation
    Tanveer, Md Qamar
    Haleem, Abid
    Suhaib, Mohd
    SN APPLIED SCIENCES, 2019, 1 (12):
  • [24] Influence of Triangular Pattern Infill on 3D Printed Torus Mechanical Behavior
    Braileanu, Patricia Isabela
    Prisecaru, Delia Alexandra
    Crisan, Nicoleta
    Stoica, Marilena
    Calin, Andrei
    MATERIALE PLASTICE, 2022, 59 (04) : 155 - 164
  • [25] An investigation of combined effect of infill pattern, density, and layer thickness on mechanical properties of 3D printed ABS by fused filament fabrication
    Agrawal, Anant Prakash
    Kumar, Virendra
    Kumar, Jitendra
    Paramasivam, Prabhu
    Dhanasekaran, Seshathiri
    Prasad, Lalta
    HELIYON, 2023, 9 (06)
  • [26] Effects of the infill pattern on mechanical properties of fused layer modeling (FLM) 3D printed wood/polylactic acid (PLA) composites
    S. Kain
    J. V. Ecker
    A. Haider
    M. Musso
    A. Petutschnigg
    European Journal of Wood and Wood Products, 2020, 78 : 65 - 74
  • [27] Effects of the infill pattern on mechanical properties of fused layer modeling (FLM) 3D printed wood/polylactic acid (PLA) composites
    Kain, S.
    Ecker, J. V.
    Haider, A.
    Musso, M.
    Petutschnigg, A.
    EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2020, 78 (01) : 65 - 74
  • [28] Infill Strategy in 3D Printed PLA Carbon Composites: Effect on Tensile Performance
    Guessasma, Sofiane
    Belhabib, Sofiane
    POLYMERS, 2022, 14 (19)
  • [29] Effect of combination printing parameter (infill density and raster angle) on the mechanical and electrical properties of 3D printed PLA/ZnO and cPLA/ZnO composites
    Tan, Mei Ai
    Yeoh, Cheow Keat
    Teh, Pei Leng
    Rahim, Nor Azura Abdul
    Song, Cheah Chie
    Mansor, Nor Shahira Shahkila
    JOURNAL OF POLYMER ENGINEERING, 2022, 42 (04) : 351 - 361
  • [30] Influence of infill density on microstructure and flexural behavior of 3D printed PLA thermoplastic parts processed by fusion deposition modeling
    Aloyaydi, Bandar Abdullah
    Subbarayan, Sivasankaran
    Ammar, Hany Rizk
    AIMS MATERIALS SCIENCE, 2019, 6 (06) : 1033 - 1048
12345