BIOACTIVE DOUBLE GLASS COATINGS FOR CO-CR-MO ALLOY

被引:13
|
作者
ANDERSSON, OH
KARLSSON, KH
HERO, H
VEDEL, E
YLIURPO, A
PAJAMAKI, KJJ
LINDHOLM, TS
机构
[1] SCANDINAVIAN INST DENT MAT,NIOM,N-1344 HASLUM,NORWAY
[2] UNIV TURKU,INST DENT,SF-20520 TURKU,FINLAND
[3] UNIV TAMPERE,DEPT CLIN SCI,SF-33520 TAMPERE,FINLAND
关键词
D O I
10.1007/BF00146863
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
Glass compositions for double coatings for a Co-Cr-Mo alloy were developed. The glass compositions were chosen to fulfil such requirements as matching thermal expansion, low glass transition temperature and moderate solubility. For the ground coat a fairly high durability is required, whereas the cover coat must be bioactive, i.e. become attached to living bone by a chemical bond. Two compositions of each type were developed by computer-aided optimization. The glasses were chosen in the Na2O-CaO-B2O3-Al2O3-SiO2-P2O5 system. The bioactivity was tested in vitro by immersion in a simulated body fluid. The double coatings on Co-Cr-Mo alloy released hexavalent chromium into the solution as detected by yellow colouration and spectrophotometry. This colouration was strong at the margin between coated and uncoated metal and may be explained by oxidation of trivalent chromium of the alloy in the presence of glass. The released chromium did not have any notable effect on the calcium phosphate formation. After replenishing the solution no coloration was observed. This suggests that the chromate is easily dissolved and that it may be possible to wash it out prior to implantation.
引用
收藏
页码:242 / 247
页数:6
相关论文
共 50 条
  • [41] Effects of Aloe Mucilage on Tribological Properties of Co-Cr-Mo Alloy
    1600, Chongqing Wujiu Periodicals Press (46):
  • [42] Effect of Artificial Saliva Modification on Corrosion Resistance of Metal Oxide Coatings on Co-Cr-Mo Dental Alloy
    Losiewicz, Bozena
    Osak, Patrycja
    Gorka-Kulikowska, Karolina
    Maszybrocka, Joanna
    MATERIALS, 2024, 17 (21)
  • [43] Effect of temperature on the microstructure of hot pressed Co based Co-Cr-Mo alloy
    Somunkiran, I.
    Balin, A.
    OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 2013, 7 (9-10): : 702 - 706
  • [44] High strength Co-Cr-Mo alloy by hot isostatic pressing of powder
    Bardos, D.I.
    Biomaterials Medical Devices and Artificial Organs, 1979, 7 (01): : 73 - 80
  • [45] Control of surface morphology of carbide coating on Co-Cr-Mo implant alloy
    Vandamme, NS
    Topoleski, LDT
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2005, 16 (07) : 647 - 654
  • [46] Nd:YAG laser cladding of Co-Cr-Mo alloy on γ-TiAl substrate
    Barekat, Masoud
    Razavi, Reza Shoja
    Ghasemi, Ali
    OPTICS AND LASER TECHNOLOGY, 2016, 80 : 145 - 152
  • [47] Electrolytic HA/ZrO2 double layers coating on Co-Cr-Mo alloy for orthopaedic applications
    Yen, S. K.
    Lin, C. M.
    Lin, G. S.
    Chen, S. H.
    Medical Device Materials II: Proceedings from the Materials & Processes for Medical Devices Conference 2004, 2005, : 409 - 414
  • [48] Grain growth during selective laser melting of a Co-Cr-Mo alloy
    Chen, Z. W.
    Phan, M. A. L.
    Darvish, K.
    JOURNAL OF MATERIALS SCIENCE, 2017, 52 (12) : 7415 - 7427
  • [49] Control of surface morphology of carbide coating on Co-Cr-Mo implant alloy
    N. S. Vandamme
    L. D. T. Topoleski
    Journal of Materials Science: Materials in Medicine, 2005, 16 : 647 - 654
  • [50] RELATIONSHIPS BETWEEN PROCESSING, MICROSTRUCTURE, AND TENSILE PROPERTIES OF CO-CR-MO ALLOY
    BOECK, BA
    SANDERS, TH
    ANAND, V
    HICKL, AJ
    KUMAR, P
    POWDER METALLURGY, 1985, 28 (02) : 97 - 104