BIOACTIVE DOUBLE GLASS COATINGS FOR CO-CR-MO ALLOY

被引:13
|
作者
ANDERSSON, OH
KARLSSON, KH
HERO, H
VEDEL, E
YLIURPO, A
PAJAMAKI, KJJ
LINDHOLM, TS
机构
[1] SCANDINAVIAN INST DENT MAT,NIOM,N-1344 HASLUM,NORWAY
[2] UNIV TURKU,INST DENT,SF-20520 TURKU,FINLAND
[3] UNIV TAMPERE,DEPT CLIN SCI,SF-33520 TAMPERE,FINLAND
关键词
D O I
10.1007/BF00146863
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
Glass compositions for double coatings for a Co-Cr-Mo alloy were developed. The glass compositions were chosen to fulfil such requirements as matching thermal expansion, low glass transition temperature and moderate solubility. For the ground coat a fairly high durability is required, whereas the cover coat must be bioactive, i.e. become attached to living bone by a chemical bond. Two compositions of each type were developed by computer-aided optimization. The glasses were chosen in the Na2O-CaO-B2O3-Al2O3-SiO2-P2O5 system. The bioactivity was tested in vitro by immersion in a simulated body fluid. The double coatings on Co-Cr-Mo alloy released hexavalent chromium into the solution as detected by yellow colouration and spectrophotometry. This colouration was strong at the margin between coated and uncoated metal and may be explained by oxidation of trivalent chromium of the alloy in the presence of glass. The released chromium did not have any notable effect on the calcium phosphate formation. After replenishing the solution no coloration was observed. This suggests that the chromate is easily dissolved and that it may be possible to wash it out prior to implantation.
引用
收藏
页码:242 / 247
页数:6
相关论文
共 50 条
  • [31] Effect of nitrogen on the microstructure and mechanical properties of a Co-Cr-Mo alloy
    Centro De Investigacion y De, Estudios Avanzados del IPN-Unidad, Saltillo, Saltillo Coah, Mexico
    Mater Des, 2 (79-83):
  • [32] Surface modification of Co-Cr-Mo alloy by plasma assisted CVD
    Resen, Ali Mezher
    MATERIALS TODAY-PROCEEDINGS, 2021, 42 : 2896 - 2900
  • [33] Cytocompatibility for Co-Cr-Mo alloy with a small amount of zirconium or carbon
    Numata, Yasuko
    Syuto, Bunei
    Nomura, Naoyuki
    Chiba, Akihiko
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2007, 71 (07) : 578 - 585
  • [34] Connection between biocompatibility and electrochemical stability of a Co-Cr-Mo alloy
    Aionicesei, Elena
    Ionita, Daniela
    Miculescu, Florin
    Cimpan, Anara
    Demetrescu, Ioana
    REVISTA DE CHIMIE, 2006, 57 (08): : 813 - 818
  • [35] Wear behavior of carbide coated Co-Cr-Mo implant alloy
    Vandamme, NS
    Wayman, BH
    Topoleski, LDT
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2003, 14 (01) : 47 - 53
  • [36] IMPACT TESTING OF CAST CO-CR-MO ALLOY FOR SURGICAL IMPLANTS
    STURLASON, A
    LANGER, EW
    SCANDINAVIAN JOURNAL OF METALLURGY, 1985, 14 (06) : 313 - 315
  • [37] Effect of nitrogen on the microstructure and mechanical properties of a Co-Cr-Mo alloy
    Escobedo, J
    Mendez, J
    Cortes, D
    Gomez, J
    Mendez, M
    Mancha, H
    MATERIALS & DESIGN, 1996, 17 (02): : 79 - 83
  • [38] Osseointegration Improvement of Co-Cr-Mo Alloy Produced by Additive Manufacturing
    Iatecola, Amilton
    Longhitano, Guilherme Arthur
    Martinez Antunes, Luiz Henrique
    Jardini, Andre Luiz
    Miguel, Emilio de Castro
    Beres, Miloslav
    Lambert, Carlos Salles
    Andrade, Tiago Neves
    Buchaim, Rogerio Leone
    Buchaim, Daniela Vieira
    Pomini, Karina Torres
    Dias, Jefferson Aparecido
    Mesquita Serva Spressao, Daniele Raineri
    Felix, Marcilio
    Camargo Cardoso, Guinea Brasil
    da Cunha, Marcelo Rodrigues
    PHARMACEUTICS, 2021, 13 (05)
  • [39] Assessment of precipitation behavior in dental castings of a Co-Cr-Mo alloy
    Yamanaka, Kenta
    Mori, Manami
    Chiba, Akihiko
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2015, 50 : 268 - 276
  • [40] Microstructure and Tribological Properties of Weld Deposited Co-Cr-Mo Alloy
    Mantrala, Mallik Kedar
    Rao, Srinivasa Ch
    Rao, Kesava V. V. S.
    JOURNAL FOR MANUFACTURING SCIENCE AND PRODUCTION, 2015, 15 (02) : 239 - 241