Cavity Model for the Slot Radiation of an Enclosure Excited by Printed Circuit Board Traces With Different Loads

被引：5

作者：

Poschalko, Christian ^{[1
]}

Selberherr, Siegfried ^{[2
]}

机构：

[1] Robert Bosch AG, Diesel & Gasoline Syst, A-1110 Vienna, Austria

[2] Vienna Univ Technol, Inst Microelect, A-1040 Vienna, Austria

来源：

IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY | 2009年 / 51卷 / 01期

关键词：

Cavity model; common-mode coupling; electrically equipped enclosures; radiated emission; ATTACHED CABLES; EMI; EMISSIONS; PLANES; FDTD;

D O I：

10.1109/TEMC.2008.2008815

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Traces on a printed circuit board (PCB) couple to the cavity consisting of the PCB ground plane and a metallic enclosure cover. We introduce this common-mode coupling of a PCB trace to the cavity field by an analytical model that is verified with 3-D simulations using HFSS. The cavity field causes radiated emission from the slots of the cavity. For an accurate calculation of the cavity field inside the enclosure and the radiated emission, we consider the radiation loss by a multiport approach. Comparisons of the analytical results for the radiated field to measurements show good agreement. Radiated emission can be calculated for arbitrary geometric enclosure shapes as a function of frequency, position of the trace on the PCB, and trace load/driver impedances.

引用

页码：18 / 24

页数：7

共 50 条

[31] A simulation of undesired wideband electromagnetic radiation from a printed circuit board
Kasuga, T
Tanaka, M
Inoue, H
PROCEEDING OF THE FOURTH INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING FOR RESOURCES, VOL 2, 2001, : 178 - 183
[32] The method of RTL concept of an hybrid to analyse the radiation of printed circuit board
Noguer, L
Dansou, J
Chilo, J
ANNALES DES TELECOMMUNICATIONS-ANNALS OF TELECOMMUNICATIONS, 2000, 55 (11-12): : 601 - 614
[33] Circuit Model and Signal Integrity Analysis for Multilayer Printed Circuit Board Interconnection
Kong, Fan
Sheng, Weixing
Ma, Xiaofeng
Han, Yubing
INTERNATIONAL JOURNAL OF RF AND MICROWAVE COMPUTER-AIDED ENGINEERING, 2014, 24 (04) : 478 - 489
[34] Fatigue failure of printed circuit board chemically etched copper traces in multifunctional composite structures
Kim, Hyonny
Gonzalez, Miguel
JOURNAL OF COMPOSITE MATERIALS, 2014, 48 (08) : 985 - 996
[35] Radiated emissions from printed circuit board traces including the effect of vias, as a function of source, termination and board characteristics
Kaires, RG
1998 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY - SYMPOSIUM RECORD, VOLS 1 AND 2, 1998, : 872 - 877
[36] Radiation pattern of a probe excited rectangular cavity-backed slot antenna
Lertwiriyaprapa, T
Phongcharoenpanich, C
Krairiksh, M
2000 5TH INTERNATIONAL SYMPOSIUM ON ANTENNAS, PROPAGATION AND EM THEORY PROCEEDINGS, 2000, : 90 - 93
[37] Development and verification of printed circuit board toroidal transformer model
Pejtersen, Jens
Monster, Jakob Dollner
Knott, Arnold
2013 TWENTY-EIGHTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION (APEC 2013), 2013, : 1654 - 1659
[38] An environmental assessment model applied to printed circuit board manufacturing
Hui, I. K.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 32 (7-8): : 834 - 842
[39] Common mode radiation of a printed circuit board with embedded decoupling capacitor excited by IC's shoot-through current
Sudo, Toshio
Ichijo, Seiju
Kushihira, Takanobu
Yamamoto, Takuya
Yamazaki, Kazuhiro
ESTC 2006: 1ST ELECTRONICS SYSTEMINTEGRATION TECHNOLOGY CONFERENCE, VOLS 1 AND 2, PROCEEDINGS, 2006, : 67 - +
[40] The recycle model of printed circuit board and its economy evaluation
Niu, Qiang
Liu, Xueping
Shi, Chuan
Xiang, Dong
Duan, Guanghong
PROCEEDINGS OF THE 2007 IEEE INTERNATIONAL SYMPOSIUM ON ELECTRONICS & THE ENVIRONMENT, CONFERENCE RECORD, 2007, : 106 - +

← 1 2 3 4 5 →