INVESTIGATIONS OF INTERFACES IN AL COMPOSITES REINFORCED WITH NI-COATED C-FIBERS

被引:0
|
作者
BEREK, H [1 ]
PODLESAK, H [1 ]
JACOBI, G [1 ]
FRITSCHE, G [1 ]
LEONHARDT, G [1 ]
机构
[1] TECH UNIV CHEMNITZ,SEKT CHEM & WERKSTOFFTECH,KARL MARX STADT,GERMANY
来源
ZEITSCHRIFT FUR METALLKUNDE | 1991年 / 82卷 / 12期
关键词
D O I
暂无
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
To produce Al composites reinforced with C fibres it is necessary to deposite thin films at the fibres. Using Ni films there are interfaces from the type Al/Ni/C. The quality of the interface determine the properties of composites. The interfaces were investigated with analytical TEM, SEM/EDS and X-ray diffraction. The results showed that an Ni diffusion into the Al matrix can be observed. Intermetallic phases of the type Al3Ni and Al9FeNi could be detected. The Al4C3 phase was not found. From these results it can be concluded that Ni depositions are suitable to reinforce the Al matrix with C fibres depending on the production parameters.
引用
收藏
页码:928 / 934
页数:7
相关论文
共 50 条
  • [41] Mechanical Properties of Ni-Coated Single Graphene Sheet and Their Embedded Aluminum Matrix Composites
    Song Hai-Yang
    Zha Xin-Wei
    COMMUNICATIONS IN THEORETICAL PHYSICS, 2010, 54 (01) : 143 - 147
  • [42] Mechanical Properties of Ni-Coated Single Graphene Sheet and Their Embedded Aluminum Matrix Composites
    宋海洋
    查新未
    CommunicationsinTheoreticalPhysics, 2010, 54 (07) : 143 - 147
  • [43] Fabrication and characterization of Ni-Coated Graphite/Al-Zn coatings by cold spraying
    Zhu, Longqiang
    Hu, Shunjie
    Xu, Bopin
    Zhang, Guodong
    SURFACE ENGINEERING, 2020, 36 (10) : 1032 - 1039
  • [44] Microstructure and mechanical properties of Cu\Ni-coated α-Al2O3w and graphene nano-platelets co-reinforced copper matrix composites
    Li, Zhijian
    Jiang, Xiaosong
    Sun, Hongliang
    Liu, Sipeng
    Pang, Yong
    Wu, Zixuan
    Yang, Liu
    MATERIALS CHEMISTRY AND PHYSICS, 2024, 325
  • [45] Broadband and tunable high-performance microwave absorption properties by Ni-coated carbon fibers
    Darvishzadeh, Ayoub
    Nasouri, Komeil
    MATERIALS CHEMISTRY AND PHYSICS, 2021, 274
  • [46] Fabrication of a thin and lightweight microwave absorber containing Ni-coated glass fibers by electroless plating
    Nam, Young-Woo
    Choi, Jae-Hun
    Lee, Won-Jun
    Kim, Chun-Gon
    COMPOSITES SCIENCE AND TECHNOLOGY, 2017, 145 : 165 - 172
  • [47] Ni-TiSMA-reinforced Al composites
    Porter, GA
    Liaw, PK
    Tiegs, TN
    Wu, KH
    JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 2000, 52 (10): : 52 - 56
  • [48] Thermal conductivity of Ni-coated MWCNT reinforced 70Sn-30Bi alloy
    Billah, Md Muktadir
    Chen, Quanfang
    COMPOSITES PART B-ENGINEERING, 2017, 129 : 162 - 168
  • [49] NANOMECHANICAL PROPERTIES OF A Sn-Ag-Cu SOLDER REINFORCED WITH Ni-COATED CARBON NANOTUBES
    Han, Y. D.
    Jing, H. Y.
    Nai, S. M. L.
    Xu, L. Y.
    Tan, C. M.
    Wei, J.
    INTERNATIONAL JOURNAL OF NANOSCIENCE, 2010, 9 (04) : 283 - 287
  • [50] The Influence of Ni-Coated TiC on Laser-Deposited IN625 Metal Matrix Composites
    Baolong Zheng
    Troy Topping
    John E. Smugeresky
    Yizhang Zhou
    Asit Biswas
    Dean Baker
    Enrique J. Lavernia
    Metallurgical and Materials Transactions A, 2010, 41 : 568 - 573