INVESTIGATIONS OF INTERFACES IN AL COMPOSITES REINFORCED WITH NI-COATED C-FIBERS

被引：0

作者：

BEREK, H ^{[1
]}

PODLESAK, H ^{[1
]}

JACOBI, G ^{[1
]}

FRITSCHE, G ^{[1
]}

LEONHARDT, G ^{[1
]}

机构：

[1] TECH UNIV CHEMNITZ,SEKT CHEM & WERKSTOFFTECH,KARL MARX STADT,GERMANY

来源：

ZEITSCHRIFT FUR METALLKUNDE | 1991年 / 82卷 / 12期

关键词：

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

To produce Al composites reinforced with C fibres it is necessary to deposite thin films at the fibres. Using Ni films there are interfaces from the type Al/Ni/C. The quality of the interface determine the properties of composites. The interfaces were investigated with analytical TEM, SEM/EDS and X-ray diffraction. The results showed that an Ni diffusion into the Al matrix can be observed. Intermetallic phases of the type Al3Ni and Al9FeNi could be detected. The Al4C3 phase was not found. From these results it can be concluded that Ni depositions are suitable to reinforce the Al matrix with C fibres depending on the production parameters.

引用

页码：928 / 934

页数：7

共 50 条

[31] Effect of anodic oxidation on the properties of Ni-coated carbon fibers produced by electrodeposition
Lu Xiao-xuan
Lu Chun-xiang
Yang Yu
Zhou Pu-cha
An Feng
He Fu
NEW CARBON MATERIALS, 2010, 25 (06) : 454 - 459
[32] Effect of anodic oxidation on the properties of Ni-coated carbon fibers produced by electrodeposition
Lu, Xiao-Xuan
Lu, Chun-Xiang
Yang, Yu
Zhou, Pu-Cha
An, Feng
He, Fu
Xinxing Tan Cailiao/New Carbon Materials, 2010, 25 (06): : 454 - 459
[33] Fabrication and characterisation of Ni-coated carbon fibre-reinforced alumina ceramic matrix composites using electrophoretic deposition
Kaya, C
Kaya, F
Boccaccini, AR
Chawla, KK
ACTA MATERIALIA, 2001, 49 (07) : 1189 - 1197
[34] INFLUENCE OF VARIOUS POLAR SURFACE OXIDES ON THE REINFORCEMENT BEHAVIOR OF C-FIBERS IN C-FIBER REINFORCED EPOXY COMPOSITES
FITZER, E
WEISS, R
CARBON, 1984, 22 (02) : 231 - 231
[35] Development of a Sn–Ag–Cu solder reinforced with Ni-coated carbon nanotubes
Y. D. Han
S. M. L. Nai
H. Y. Jing
L. Y. Xu
C. M. Tan
J. Wei
Journal of Materials Science: Materials in Electronics, 2011, 22 : 315 - 322
[36] WETTABILITY AND INTERACTION BETWEEN MOLTEN AL-COATED AND NI-COATED AL2O3 OR PURE NI SUBSTRATE
MORI, N
MIYAHARA, H
KOGA, M
OGI, K
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1991, 55 (04) : 444 - 451
[37] Enhanced interfacial properties of Ni-coated Ti3C2 MXene on Al-matrix composites: A first-principles investigation
Liu, Zhibin
Ling, Ying
Hu, Wenjie
Yan, Hong
DIAMOND AND RELATED MATERIALS, 2024, 150
[38] Deposition Behavior and Microstructure of Cold-Sprayed Ni-Coated Al Particles
Chen, Xiao
Zhou, Hongkai
Pi, Zhimin
Huang, Zhiwu
COATINGS, 2022, 12 (04)
[39] TEM OBSERVATIONS OF A NI-COATED CARBON-FIBER REINFORCED METAL MATRIX COMPOSITE
HALL, IW
METALLOGRAPHY, 1987, 20 (02): : 237 - 246
[40] Development of a Sn-Ag-Cu solder reinforced with Ni-coated carbon nanotubes
Han, Y. D.
Nai, S. M. L.
Jing, H. Y.
Xu, L. Y.
Tan, C. M.
Wei, J.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2011, 22 (03) : 315 - 322

← 1 2 3 4 5 →