FRACTURE ASSESSMENT FOR SECONDARY LOADS

The fracture assessment of structures subjected to secondary loading systems was studied by FEM-analysis of a few illustrative two-dimensional examples. The first example is an edge-cracked plate with a thermal gradient. The FEM-calculations revealed that a purely elastic analysis yielded J-values that are in most cases considerably more conservative than the ones calculated from an elastic-plastic analysis. The results were further compared with different engineering type non-linear estimates. As a second example a crack emanating from a semi-circular notch in a rectangular plate was chosen. The plate was subjected to uniaxial tension along its boundaries. It turned out that for the cases considered the J-values were fairly close to those elastically predicted.