ALLOYING AND POST-HEAT-TREATMENT OF THERMAL-SPRAYED COATINGS OF SELF-FLUXING ALLOYS

被引：26
|
作者：
SHIEH, YH [1 ]
WANG, JT [1 ]
SHIH, HC [1 ]
WU, ST [1 ]
机构：
[1] NATL TSING HUA UNIV,DEPT MAT SCI & ENGN,HSINCHU 300,TAIWAN
来源：
SURFACE & COATINGS TECHNOLOGY | 1993年 / 58卷 / 01期
关键词：
D O I：
10.1016/0257-8972(93)90176-O
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The hardness and wear resistance of a thermal-sprayed self-fluxing alloy (Ni-17wt.%Cr-3.3wt.%B-4.3wt.%Si-4.2wt.%Fe-0.9wt.%C) is improved by adding 20 wt.% of B13C2 to the powder and heating the coating at 1030-degrees-C in a vacuum of 10(-2) Torr. Porosity is decreased from 20 to 0.3 vol.% by the heating if a pre-heating at 950-degrees-C is carried out to facilitate the escape of trapped gases. The presence of numerous precipitates of Cr3C2, and CrB in the coating is consistent with a Rockwell hardness of HRC 63. The abrasive wear resistance is much improved compared with that of Stellite 6B.
引用
收藏
页码：73 / 77
页数：5
相关论文
共 50 条
  • [21] EFFECT OF LASER TREATMENT ON THE STRUCTURE AND WEAR AND FRICTIONAL-PROPERTIES OF PLASMA-SPRAYED COATINGS OF SELF-FLUXING ALLOYS .1. STRUCTURAL CHARACTERISTICS OF COATINGS PARTIALLY FUSED BY LASER-RADIATION
    SPIRIDONOV, NV
    PROTASEVICH, VA
    SAMODEEVA, TI
    SOVIET POWDER METALLURGY AND METAL CERAMICS, 1988, 27 (01): : 11 - 14
  • [22] Self-propagating high-temperature synthesis for the deposition of thermal-sprayed coatings
    Borisova, A. L.
    Borisov, Yu. S.
    POWDER METALLURGY AND METAL CERAMICS, 2008, 47 (1-2) : 80 - 94
  • [23] Wear resistance of coatings from self-fluxing alloys after laser doping under dry friction conditions
    Devoino O.G.
    Kardapolova M.A.
    Laber S.
    Feldstein E.A.
    D'yachenko O.V.
    Journal of Engineering Physics and Thermophysics, 2004, 77 (2) : 372 - 376
  • [24] Self-propagating high-temperature synthesis for the deposition of thermal-sprayed coatings
    A. L. Borisova
    Yu. S. Borisov
    Powder Metallurgy and Metal Ceramics, 2008, 47 : 80 - 94
  • [25] Laser-assisted selective fusing of thermal sprayed Ni-based self-fluxing alloys by using high-power diode lasers
    Chun, Eun-Joon
    Kim, Min-Su
    Nishikawa, Hiroshi
    Park, Changkyoo
    Suh, Jeong
    OPTICS AND LASER TECHNOLOGY, 2018, 100 : 317 - 324
  • [26] Optimization of Conditions for Plasma Spraying Coatings Based on Self-Fluxing Alloys with Additions of Zirconium and Hafnium Intermetallic Hydrides
    Galina N. Dubrovskaya
    Eugenii Ya. Gubar'
    Powder Metallurgy and Metal Ceramics, 2002, 41 : 36 - 41
  • [27] The optimization of conditions for the spraying of plasma self-fluxing alloys based coatings with additions of zirconium and hafnium intermetallides hydrides
    Dubrovskaya, G.N.
    Gubar', E.A.
    Chastokolenko, I.P.
    Poroshkovaya Metallurgiya, 2002, (1-2): : 40 - 47
  • [28] Optimization of conditions for plasma spraying coatings based on self-fluxing alloys with additions of zirconium and hafnium intermetallic hydrides
    Dubrovskaya, GN
    Gubar', EY
    Chastokolenko, IP
    POWDER METALLURGY AND METAL CERAMICS, 2002, 41 (1-2) : 36 - 41
  • [29] Influence of coating thickness on fatigue properties of sprayed Co-based self-fluxing alloy with fusing treatment
    Oh, J
    Komotori, J
    Shimizu, M
    THERMAL SPRAY 2001: NEW SURFACES FOR A NEW MILLENNIUM, 2001, : 1023 - 1029
  • [30] Integrity and thermal decomposition of apatite in coatings influenced by underlying titanium during plasma spraying and post-heat-treatment
    Weng, J
    Liu, XG
    Zhang, XD
    deGroot, K
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 1996, 30 (01): : 5 - 11
12345