CHARACTERIZATION OF THE SURFACE OF ARAMID FIBERS

被引：0
|
作者：
STEVENS, MG [1 ]
MASSOUDI, AH [1 ]
机构：
[1] UNIV TECHNOL SYDNEY, DEPT MAT SCI, BROADWAY, NSW 2007, AUSTRALIA
来源：
MATERIALS FORUM | 1992年 / 16卷 / 04期
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Adhesion performance between aramid fibres and polyester resin may be evaluated by various techniques. In this work the most applicable, reliable and reproducible techniques were X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy for detecting changes in the surface composition of the fibres as a result of chemical washing. Contact angle measurements of liquid drops on single fibres by the drop profile method indicated a decrease in the polarity of the surface after washing. The interfacial shear strength and maximum shear strength of aramid/polyester composites showed no significant differences between the as-supplied and washed fibres.
引用
收藏
页码：345 / 348
页数：4
相关论文
共 50 条
  • [1] Surface modification and characterization of aramid fibers with hybrid coating
    Chen, Jianrui
    Zhu, Yaofeng
    Ni, Qingqing
    Fu, Yaqin
    Fu, Xiang
    APPLIED SURFACE SCIENCE, 2014, 321 : 103 - 108
  • [2] Experimental characterization of contact angle and surface energy on aramid fibers
    Hao, Wenfeng
    Yao, Xuefeng
    Ke, Yuchao
    Ma, Yinji
    Li, Faxin
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2013, 27 (09) : 1012 - 1022
  • [3] SURFACE MODIFICATION OF ARAMID FIBERS
    MERCX, FPM
    LEMSTRA, PJ
    POLYMER COMMUNICATIONS, 1990, 31 (07): : 252 - 255
  • [4] Study on the Surface Metallization of Aramid fibers
    Li, Long
    Hu, Xueyu
    FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY II, PTS 1 AND 2, 2012, 503-504 : 1216 - 1219
  • [5] Laboratory performance characterization of polyolefin/ aramid fibers and synthetic aramid fibers reinforced asphalt mixtures
    Khan, Ali Raza
    Ali, Ayman
    Mehta, Yusuf
    Lein, Wade
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 419
  • [6] SURFACE-TREATMENT TECHNIQUE FOR ARAMID FIBERS
    BREZNICK, M
    BANBAJI, J
    GUTTMANN, H
    MAROM, G
    POLYMER COMMUNICATIONS, 1987, 28 (02): : 55 - 56
  • [7] Surface improvements of aramid fibers by physical treatments
    Watanabe, H
    Furukawa, M
    Takata, T
    Yamamoto, M
    MACROMOLECULAR SYMPOSIA, 2000, 159 : 131 - 141
  • [8] AN ECOLOGICAL APPROACH FOR THE SURFACE MODIFICATION OF ARAMID FIBERS
    Demir, Asli
    Bozaci, Ebru
    Gulumser, Tulay
    Sarikanat, Mehmet
    TEKSTIL VE KONFEKSIYON, 2016, 26 (03): : 256 - 261
  • [9] ARAMID FIBERS Perspectives on the Industrial Implementation of Novel Microwave Assisted Surface Modification Method for Aramid Fibers
    Palola, S.
    Sarlinand, E.
    Vuorinen, J.
    SAMPE JOURNAL, 2019, 55 (03) : 22 - 29
  • [10] Research on the surface roughness of aramid fibers via the surface modification
    Yang, Dan
    Lin, Wei
    Xin, Binjie
    Miao, Yajing
    Chen, Xiaogang
    JOURNAL OF THE TEXTILE INSTITUTE, 2021, 112 (11) : 1743 - 1752
12345