EFFECTS OF PRESTRAIN ON PRECIPITATION HARDENING OF CU ADDED ULTRA-LOW CARBON COLD-ROLLED STEEL SHEET

被引：8

作者：

ONODERA, R ^{[1
]}

MIZUI, N ^{[1
]}

机构：

[1] SUMITOMO MET IND LTD,IRON & STEEL RES LABS,AMAGASAKI,HYOGO 660,JAPAN

来源：

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN | 1993年 / 79卷 / 06期

关键词：

COPPER ADDED STEEL; ULTRA-LOW CARBON STEEL; TITANIUM-ADDED STEEL; CONTINUOUS ANNEALING; PRECIPITATION HARDENING; PRESTRAIN;

D O I：

10.2355/tetsutohagane1955.79.6_671

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Effect of prestrain on the precipitation hardening in 1.4%Cu-added ultra-low carbon Ti-added steel has been studied. The specimens were aged at temperatures below 550-degrees-C after annealing or subsequent prestrain up to 10%. The as-annealed specimens showed considerable precipitation hardening only around 550-degrees-C. While the prestrained specimens hardened at a temperature as low as 350-degrees-C. The electrical resistivity and hardness measurements revealed that there existed a new nose for Cu aging around 400-degrees-C in addition to normal one around 600-degrees-C. The former nose can be related to formation of metastable phase, and was largely accelerated by the prestrain. This acceleration effect can be explained in terms of higher diffusivity of Cu atoms due to excess vacancies formed by the prestrain.

引用

页码：671 / 677

页数：7

共 50 条

[21] Elimination of surface defects in cold-rolled extra low carbon steel sheet
Genzano, C.
Madias, J.
Dalmaso, D.
Petroni, J.
Biurrun, D.
Di Gresia, G.
Iron and Steelmaker (I and SM), 2002, 29 (06): : 23 - 26
[22] α→γ→α transformation texture formation at cold-rolled ultra low carbon steel surfaces
Yoshinaga, N
Kestens, L
De Cooman, BC
ICOTOM 14: TEXTURES OF MATERIALS, PTS 1AND 2, 2005, 495-497 : 1267 - 1272
[23] Age Hardening Characteristics of an Ultra-Low Carbon Cu Bearing Steel
Sun, Mingxue
Xu, Yang
MATERIALS, 2020, 13 (18)
[24] DEVELOPMENT OF BAKE-HARDENING COLD-ROLLED STEEL SHEET BY BOX ANNEALING
OKAMOTO, A
TAKAHASKI, M
JOURNAL OF METALS, 1980, 32 (12): : 90 - 90
[25] STRENGTHENING OF ULTRA-LOW CARBON NI-CR STEEL BY PRECIPITATION HARDENING
KIMURA, I
YADA, H
HONDA, M
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1972, 12 (04) : 323 - &
[26] EFFECT OF HOT-ROLLING CONDITION ON TEXTURE OF COLD-ROLLED AND ANNEALED ULTRA-LOW-CARBON STEEL SHEET
HASHIMOTO, S
KASHIMA, T
INOUE, T
TEXTURES AND MICROSTRUCTURES, 1991, 14 : 841 - 846
[27] EFFECT OF PRECIPITATE DISPERSION ON RECRYSTALLIZATION TEXTURE OF NIOBIUM-ADDED EXTRA-LOW CARBON COLD-ROLLED STEEL SHEET
SATOH, S
OBARA, T
TSUNOYAMA, K
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 26 (08) : 737 - 744
[28] ON THE DEVELOPMENT OF (111) GRAINS THROUGH THE ANNEALING IN COLD-ROLLED CU-BEARING LOW-CARBON STEEL SHEET
ERA, H
SHIMIZU, M
HIRUTA, T
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 70 (15): : 1946 - 1953
[29] Effects of Excess C on New Grain Formation and Static Recrystallization Behavior at Shear Bands in Cold-Rolled Ultra-Low Carbon Steel Sheets
Minami, Hidekazu
Funakawa, Yoshimasa
Tsuji, Tomoki
Kobayashi, Masakazu
Miura, Hiromi
ISIJ INTERNATIONAL, 2021, 61 (07) : 2159 - 2166
[30] Effects of Excess C on New Grain Formation and Static Recrystallization Behavior at Shear Bands in Cold-Rolled Ultra-Low Carbon Steel Sheets
Minami, Hidekazu
Funakawa, Yoshimasa
Tsuji, Tomoki
Kobayashi, Masakazu
Miura, Hiromi
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2019, 105 (12): : 1153 - 1162

← 1 2 3 4 5 →