K/NA-TREATED FE-CR-C HARDFACING ALLOYS WITH HIGH-IMPACT-ABRASION RESISTANCE

被引：0
|
作者：
YANG, JH
WANG, XB
机构：
来源：
WELDING JOURNAL | 1995年 / 74卷 / 03期
关键词：
HARD FACING ALLOYS; FE-CR-C; K ADDITION; NA ADDITION; ELECTRODE; TOUGHNESS; ABRASION-RESISTANT ALLOY; MICROSTRUCTURE STUDY; MECHANICAL TESTS; MATRIX TRANSFORMATION;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
This paper deals with K/Na-containing additives in the coatings or cores of electrodes, transforming the martensitic matrix of Fe-Cr-C hardfacing alloy into an austenitic one. The austenitic martrix hardened by the fine dispersed (Cr, Fe)(7)C-3, together with the isolated lumpish eutectic carbide, enchance both the impact and abrasion resistance of this alloy. The authors also found that Na doubled the effectiveness of the additive, and 50% less is needed to get better results compared to the K addition.
引用
收藏
页码：S103 / S107
页数：5
相关论文
共 50 条
  • [41] Metallurgical and Tribological Evaluation of Fe-Cr-C Hardfacing Alloys (vol 18, pg 868, 2018)
    Pawar, Sachin
    Mukhopadhyay, Goutam
    Jha, Aman Kumar
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2018, 18 (04) : 1043 - 1043
  • [42] Effects of B contents on the microstructure and wear resistance of hypereutectic Fe-Cr-C hardfacing alloy coating
    Wang, Jibo
    Lu, Jianxiang
    Xing, Xiaolei
    Zhou, Yefei
    Liu, Shaocun
    Qi, Xiaowen
    Yang, Qingxiang
    MATERIALS RESEARCH EXPRESS, 2019, 6 (10)
  • [43] Microstructure and wear resistance of Fe-Cr-B-C hardfacing alloys
    Gong, Jian-Xun
    Li, Dan
    Xiao, Yi-Feng
    Zhang, Qing-Hui
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2010, 31 (03): : 136 - 141
  • [44] Microstructures and wear resistance of Fe-Cr-B-C hardfacing alloys
    Wang, Zhi-Hui
    Wan, Guo-Li
    He, Ding-Yong
    Jiang, Jian-Min
    Cui, Li
    Cailiao Gongcheng/Journal of Materials Engineering, 2014, (09): : 57 - 62
  • [45] The effect of Cr on the microstructure and wear resistance of Fe-Cr-V-C hardfacing alloys
    Zong, Lin
    Liu, Zhengjun
    ADVANCED MATERIALS, PTS 1-4, 2011, 239-242 : 1203 - +
  • [46] Effect of Nb additive on wear resistance and tensile properties of the hypereutectic Fe-Cr-C hardfacing alloy
    Liu, Sha
    Shi, Zhijun
    Xing, Xiaolei
    Ren, Xuejun
    Zhou, Yefei
    Yang, Qingxiang
    MATERIALS TODAY COMMUNICATIONS, 2020, 24
  • [47] Effect of vanadium on microstructures and properties of Fe-Cr-C self-shielded metal cored hardfacing alloys
    Jiang, M.
    Li, Z. X.
    Wang, Y. J.
    Shi, Y. W.
    Jiang, J. M.
    Li, X. B.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2008, 13 (02) : 114 - 117
  • [48] Influence of microstructure on micro-abrasive wear resistance of alloys Fe-Cr-C and Fe-Cr-C-Nb
    de Oliveira, Tatiane Gabi
    da Costa, Adilson Rodrigues
    MATERIA-RIO DE JANEIRO, 2019, 24 (01):
  • [49] High-temperature strength of unidirectionally solidified Fe-Cr-C eutectic alloys
    Goto, SJ
    Liu, CM
    Aso, SS
    Komatsu, Y
    CREEP AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES, 2001, : 515 - 524
  • [50] Effects of flux-cored arc welding technology on microstructure and wear resistance of Fe-Cr-C hardfacing alloy
    Tippayasam, Chayanee
    Taengwa, Chaiyanan
    Palomas, Jednupong
    Siripongsakul, Thamrongsin
    Thaweechai, Thammanoon
    Kaewvilai, Attaphon
    MATERIALS TODAY COMMUNICATIONS, 2023, 35
12345