STUDY OF CRITICAL FAILURE PARAMETERS FOR AN ADHESIVE-BONDED SINGLE LAP JOINT WITH CERAMIC ADHERENDS

被引：12
|
作者：
BAZIARD, Y [1 ]
ELABDI, R [1 ]
AMARA, D [1 ]
PETIT, JA [1 ]
LEVALLOIS, F [1 ]
机构：
[1] MATRA MARCONI SPACE,F-31077 TOULOUSE,FRANCE
来源：
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES | 1995年 / 15卷 / 03期
关键词：
STRUCTURAL ADHESIVE; CERAMIC ADHEREND; ADHESIVE-BONDED JOINTS; FINITE ELEMENT METHOD; FRACTURE MECHANICS;
D O I：
10.1016/0143-7496(95)91626-H
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
The failure behaviour of an adhesive-bonded single lap joint with ceramic (silicon carbide) adherends has been investigated using an experimental crack test in which the conditions are close to those in the ASTM D2293-69 standard test. The critical strain energy release rate (G(IIC)) and the critical stress intensity factor in shear mode (K-IIC) are the propagation criteria used. The ANSYS finite element code has been used to model the experimental work, with good agreement being obtained between experimental and numerical results. Adhesive and cohesive failures of the joints were encountered, with different values of G(IIC) and K-IIC for each type of failure. The G(IIC) value observed for cohesive failure of the joint is 10 times greater than that calculated for adhesive failure.
引用
收藏
页码：155 / 160
页数：6
相关论文
共 50 条
  • [41] Impact Loading of Single Lap Joints of Dissimilar Lightweight Adherends Bonded With a Crash-Resistant Epoxy Adhesive
    Avendano, R.
    Carbas, R. J. C.
    Chaves, F. J. P.
    Costa, M.
    da Silva, L. F. M.
    Fernandes, A. A.
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2016, 138 (04):
  • [42] BOND SHEAR-STRENGTH FOR ADHESIVE-BONDED DOUBLE-LAP JOINTS
    TONG, LY
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1994, 31 (21) : 2919 - 2931
  • [43] THE INFLUENCE OF GEOMETRIC PARAMETERS AND MECHANICAL PROPERTIES OF ADHESIVE ON STRESS ANALYSIS IN ADHESIVELY BONDED ALUMINUM SINGLE LAP JOINT
    Samaei, Mojtaba
    Seifan, Mostafa
    Afkar, Amir
    Payakani, Amin
    TRANSACTIONS OF FAMENA, 2013, 37 (04) : 91 - 98
  • [44] THE USE OF PERFORATED LAP SHEAR SPECIMENS TO TEST THE DURABILITY OF ADHESIVE-BONDED ALUMINUM
    ARROWSMITH, DJ
    MADDISON, A
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1987, 7 (01) : 15 - 24
  • [45] Combine experimental and FEM analysis of adhesive bonded single lap joint with Al-alloy flat adherends and pre-embedded artificial defects
    Prabhuprasad Sahu
    Prakash Chandra Mishra
    SN Applied Sciences, 2019, 1
  • [46] FE analysis of single-lap adhesive joints with tapered adherends
    Marchione, F.
    International Journal of Engineering, Transactions A: Basics, 2021, 34 (10): : 2213 - 2218
  • [47] ANALYTICAL AND EXPERIMENTAL RESULTS FOR BONDED SINGLE LAP JOINTS WITH PREFORMED ADHERENDS
    SAWYER, JW
    COOPER, PA
    AIAA JOURNAL, 1981, 19 (11) : 1443 - 1451
  • [48] Effect of adherends misalignment on the strength of single-lap bonded joints
    Polini, Wilma
    Corrado, Andrea
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 106 (3-4): : 817 - 828
  • [49] Simplified analytical model for adhesive-bonded tubular joints with isotropic and composite adherends subjected to tension
    Aimmanee, Sontipee
    Hongpimolmas, Preeda
    Ruangjirakit, Kitchanon
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2018, 86 : 59 - 72
  • [50] Dynamic strain distribution measurement and crack detection of an adhesive-bonded single-lap joint under cyclic loading using embedded FBG
    Ning, Xiaoguang
    Murayama, Hideaki
    Kageyama, Kazuro
    Wada, Daichi
    Kanai, Makoto
    Ohsawa, Isamu
    Igawa, Hirotaka
    SMART MATERIALS AND STRUCTURES, 2014, 23 (10)
12345