ANALYSIS OF THE ISOTHERMAL FORCED FLOW CHEMICAL-VAPOR INFILTRATION PROCESS .1. THEORETICAL ASPECTS

被引：12

作者：

ROMAN, YG ^{[1
]}

KOTTE, JFAK ^{[1
]}

DECROON, MHJM ^{[1
]}

机构：

[1] EINDHOVEN UNIV TECHNOL,DEPT CHEM ENGN,5600 MB EINDHOVEN,NETHERLANDS

来源：

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 1995年 / 15卷 / 09期

关键词：

D O I：

10.1016/0955-2219(95)00057-2

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this paper the densification of a cylindrical pore due to a first order heterogeneous deposition reaction on the wall is described The basic understanding of these mechanisms can aid in the prediction of the infiltration time and composite porosity after densification. The results of the modelling are compared with experimental results which are reported in an additional paper, i.e. Part 2 of this study. The main characteristic parameter that determines the infiltration behaviour is the gas velocity.

引用

页码：875 / 886

页数：12

共 50 条

[31] Modeling Forced Flow Chemical Vapor Infiltration Fabrication of SiC-SiC Composites for Advanced Nuclear Reactors
Deck, Christian P.
Khalifa, H. E.
Sammuli, B.
Back, C. A.
SCIENCE AND TECHNOLOGY OF NUCLEAR INSTALLATIONS, 2013, 2013
[32] Carbon/carbon processing by forced flow-thermal gradient chemical vapor infiltration (FCVI) using propane
Vaidyaraman, S
Lackey, WJ
Agrawal, PK
CARBON, 1996, 34 (05) : 609 - 617
[33] THEORETICAL ASPECTS OF THE CHEMICAL-EQUILIBRIUM .1. ISOCHOREISOTHERMAL CONDITIONS
WOHL, A
PARAUSANU, V
REVISTA DE CHIMIE, 1989, 40 (04): : 305 - 309
[34] Numerical simulation of isothermal chemical vapor infiltration process in fabrication of carbon-carbon composites by finite element method
Kezhi Li
Hejun Li
Kaiyu Jiang
Xianghui Hou
Science in China Series E: Technological Sciences, 2000, 43 : 77 - 85
[35] Numerical simulation of isothermal chemical vapor infiltration process in fabrication of carbon-carbon composites by finite element method
李克智
李贺军
姜开宇
Science in China(Series E:Technological Sciences), 2000, (01) : 77 - 85
[36] Numerical simulation of isothermal chemical vapor infiltration process in fabrication of carbon-carbon composites by finite element method
Li, KZ
Li, HJ
Jiang, KY
Hou, XH
SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES, 2000, 43 (01): : 77 - 85
[37] Rapid processing of carbon-carbon composites by forced flow-thermal gradient chemical vapor infiltration (FCVI)
Georgia Inst of Technology, Atlanta, United States
Materials Research Society Symposium - Proceedings, 1995, 365 : 325 - 330
[38] Texturing of polycrystalline SiC films on graphitic carbon in laminated composites grown by forced-flow chemical vapor infiltration
Appiah, KA
Wang, ZL
Lackey, WJ
THIN SOLID FILMS, 2000, 371 (1-2) : 114 - 118
[39] Microstructures and mechanical properties of carbon/carbon composites prepared by impulse forced flow thermal gradient chemical vapor infiltration
Chen Qiang
Li He-Jun
Zhang Shou-Yang
Han Hong-mei
Li Ke-zhi
NEW CARBON MATERIALS, 2006, 21 (02) : 132 - 138
[40] CHEMICAL ENGINEERING ASPECTS OF 2-PHASE FLOW .1.
DEGANCE, AE
ATHERTON, RW
CHEMICAL ENGINEERING, 1970, 77 (06) : 135 - &

← 1 2 3 4 5 →