MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF HOT-PRESSED NI3AL-BASED INTERMETALLIC POWDER PRODUCED BY ROTATING ELECTRODE PROCESS

被引：4

作者：

BOZIC, D ^{[1
]}

MITKOV, M ^{[1
]}

ILIC, N ^{[1
]}

JOYANOVIC, MT ^{[1
]}

ZDUJIC, M ^{[1
]}

机构：

[1] SERBIAN ACAD ARTS & SCI, INST TECHN SCI, YU-11000 BELGRADE, YUGOSLAVIA

来源：

MATERIALS LETTERS | 1994年 / 21卷 / 02期

关键词：

D O I：

10.1016/0167-577X(94)90211-9

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Rapidly solidified powder of Ni3Al intermetallic compound modified with Fe, Ti and B was produced by a rotating electrode process (REP). The obtained powder has a mean particle size of 400 mum, spherical shape and very narrow size distribution. The powder was compacted by hot pressing to non-porous, homogeneous compacts with an average grain size of 50 mum. The yield strength shows positive temperature dependence with the maximum at 600-degrees-C. The ductility decreases moderately with temperature to the minimum at 600-degrees-C, and then abruptly increases. The results of this work show that the mechanical properties of the hot-pressed Ni3Al-based powder produced by REP are better than or at least comparable to nickel-aluminides obtained by advanced consolidation techniques (hot isostatic pressing, hot extrusion).

引用

页码：161 / 166

页数：6

共 50 条

[41] Ni2Al3 intermetallic coating: microstructure and mechanical properties
Li, Ningning
Wang, Minzhi
Zheng, Gong
Li, Pei
Li, Yongsheng
Chen, Guang
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2018, 4 (02) : 255 - 261
[42] MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF FE-NI-CR-AL STEEL WIRES PRODUCED BY IN-ROTATING-WATER SPINNING METHOD
INOUE, A
TOMIOKA, H
MASUMOTO, T
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1985, 16 (02): : 215 - 226
[43] Microstructure and mechanical properties of Ni-Al intermetallic thin coatings produced by magnetron sputtering
Ogneva, T. S.
Ruktuev, A. A.
Lazurenko, D. V.
Khomyakov, M. N.
Karmanova, A. E.
INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND MODERN TECHNOLOGIES 2019 (MEMT2019), 2020, 795
[44] The influence of different SiC amounts on the microstructure, densification, and mechanical properties of hot-pressed Al2O3-SiC composites
Akbari, Elaheh
Kakroudi, Mahdi Ghassemi
Shahedifar, Vahideh
Ghiasi, Hanieh
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2020, 17 (02) : 491 - 500
[45] MECHANICAL-PROPERTIES OF WROUGHT AND POWDER PROCESSED NI3AL ALLOYS
FUCHS, GE
SIMS, D
BOSE, A
MOORE, B
GERMAN, RM
STOLOFF, NS
JOURNAL OF METALS, 1987, 39 (07): : A10 - A10
[46] Microstructure and mechanical properties of Ni/intermetallic laminate composites produced by pulsed current hot pressing (PCHP)
Mizuuchi, K
Inoue, K
Sugioka, M
Itami, M
Kawahara, M
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2003, 67 (09) : 481 - 486
[47] Effect of rapid solidification on the microstructure and mechanical properties of hot-pressed Al-20Si-5Fe alloys
Rajabi, M.
Vahidi, M.
Simchi, A.
Davami, P.
MATERIALS CHARACTERIZATION, 2009, 60 (11) : 1370 - 1381
[48] Nanocrystalline Ni3Al-based alloys produced by mechanical alloying of Ni-Al-Co powders and consolidation
Antolak-Dudka, Anna
Krasnowski, Marek
Kulik, Tadeusz
PHYSICA STATUS SOLIDI C - CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 7 NO 5, 2010, 7 (05): : 1384 - 1387
[49] Microstructure and Mechanical Property of Hot-Pressed Al2O3-Ni-P Composites Using Ni-P-Coated Al2O3 Powders
Kim, Hyeong-Chul
Han, Jae-Kil
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2015, 2015
[50] STRUCTURE AND MECHANICAL-PROPERTIES OF TI3AL COMPACT PRODUCED BY HOT-PRESSING OF MECHANICALLY ALLOYED POWDER
MIYAZAKI, A
TOKIZANE, M
INABA, T
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1990, 54 (11) : 1279 - 1283

← 1 2 3 4 5 →