LOW-DENSITY MICROCELLULAR CARBON FOAMS

被引：62

作者：

PEKALA, RW ^{[1
]}

HOPPER, RW ^{[1
]}

机构：

[1] UNIV CALIF LAWRENCE LIVERMORE NATL LAB,LIVERMORE,CA 94550

来源：

JOURNAL OF MATERIALS SCIENCE | 1987年 / 22卷 / 05期

关键词：

FOAMS - Density - PHENOLIC RESINS - Pyrolysis - POROUS MATERIALS - Manufacture;

D O I：

10.1007/BF01132414

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A method has been developed to produce vitreous carbon foams having both low densities and small cell sizes. This process involves the replication of a porous sacrificial substrate, i. e. sodium chloride. The salt is pressed initially into bars and sintered to give a structure with continuous porosity. The pores are infused with a phenolic solution, the solvent is evaporated, and the resin is pyrolysed within the salt substrate. Extraction of the salt and freeze drying lead to the final carbon foam. The substrate serves two purposes in this process: (1) it prevents shrinkage of the foam during pyrolysis, and (2) it dictates the cell size of the foam.

引用

页码：1840 / 1844

页数：5

共 50 条

[21] A novel process for low-density alumina foams
Prabhakaran, K
Gokhale, NM
Sharma, SC
Lal, R
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2005, 88 (09) : 2600 - 2603
[22] LOW-DENSITY RESORCINOL-FORMALDEHYDE FOAMS
PEKALA, RW
STONE, RE
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1988, 195 : 106 - POLY
[23] Kinked Bisamides as Efficient Supramolecular Foam Cell Nucleating Agents for Low-Density Polystyrene Foams with Homogeneous Microcellular Morphology
Klose, Bastian
Kremer, Daniel
Aksit, Merve
van der Zwan, Kasper P.
Kreger, Klaus
Senker, Jurgen
Altstadt, Volker
Schmidt, Hans-Werner
POLYMERS, 2021, 13 (07)
[24] Rotational molding of low-density LLDPE foams
Liu, GB
Park, CB
Lefas, JA
CONFERENCE PROCEEDINGS AT ANTEC '98: PLASTICS ON MY MIND, VOLS I-3: VOL I; PROCESSING, VOL II; SPECIAL AREAS, VOL III; MATERIALS, 1998, 44 : 1822 - 1831
[25] Laser interactions with low-density plastic foams
Limpouch, J
Demchenko, NN
GuS'Kov, SY
Gromov, AI
Kalal, M
Kasperczuk, A
Kondrashov, VN
Krousky, E
Masek, K
Pfeifer, M
Pisarczyk, P
Pisarczyk, T
Rohlena, K
Rozanov, VB
Sinor, M
Ullschmied, J
LASER AND PARTICLE BEAMS, 2005, 23 (03) : 321 - 325
[26] Preparation of microcellular low-density PMMA nanocomposite foams: Influence of different fillers on the mechanical, rheological and cell morphological properties
Okolieocha, Chimezie
Beckert, Fabian
Herling, Markus
Breu, Josef
Muelhaupt, Rolf
Altstaedt, Volker
COMPOSITES SCIENCE AND TECHNOLOGY, 2015, 118 : 108 - 116
[27] Use of stereocomplex crystallites for fully-biobased microcellular low-density poly(lactic acid) foams for green packaging
Wang, Long
Lee, Richard E.
Wang, Guilong
Chu, Raymond K. M.
Zhao, Jinchuan
Park, Chul B.
CHEMICAL ENGINEERING JOURNAL, 2017, 327 : 1151 - 1162
[28] Low-density and structure-tunable microcellular PMMA foams with improved thermal-insulation and compressive mechanical properties
Wang, Guilong
Zhao, Jinchuan
Wang, Guizhen
Mark, Lun Howe
Park, Chul B.
Zhao, Guoqun
EUROPEAN POLYMER JOURNAL, 2017, 95 : 382 - 393
[29] Solvent vitrification and low-density microcellular foams through thermally induced phase separation in a polystyrene-cyclohexane system
Pimenov, VG
Sakharov, AM
POLYMER SCIENCE SERIES B, 2002, 44 (11-12) : 281 - 283
[30] The Microcellular Injection Molding of Low-Density Polyethylene (LDPE) Composites
Lee, Jungjoo
Turng, Lih-Sheng
Kramschuster, Adam
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2010, 49 (13) : 1339 - 1346

← 1 2 3 4 5 →