EFFECT OF CURING CONDITIONS ON STRENGTH, POROSITY, ABSORPTIVITY, AND SHRINKAGE OF CONCRETE IN HOT AND DRY CLIMATE

被引:42
|
作者
ALSAYED, SH
AMJAD, MA
机构
[1] KING SAUD UNIV, DEPT CIVIL ENGN, RIYADH, SAUDI ARABIA
[2] KACST, RIYADH 11442, SAUDI ARABIA
关键词
D O I
10.1016/0008-8846(94)90124-4
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This study is concerned with the effect of intermittent wet and dry curing methods on the strength, modulus of elasticity, porosity, absorptivity, and shrinkage of the concrete. The study was carried out in field conditions that are characterized by hot air temperature, low relative humidity, large diurnal variations, direct solar radiation, and relatively high wind speed. It was found that intermittent wet curing methods are suitable in the aforesaid severe conditions with regard the strength and the durability of the concrete. However, as far as the rate of shrinkage after stopping the curing process is concerned, neither the intermittent wet curing nor the dry methods are an acceptable technique of curing. Therefore, other methods to reduce the rate of shrinkage were advised. Further, and based on the results of this study, some recommendations about using the design guidelines that were formulated on the basis of experimental results carried out in relatively cold and humid climate conditions were discussed.
引用
收藏
页码:1390 / 1398
页数:9
相关论文
共 50 条
  • [41] Effects of Curing Conditions on Strength Development of High Strength Concrete
    Cai Yuebo Kwan Kwok-Hung Senior Engineer
    China Ocean Engineering, 1997, (01) : 99 - 108
  • [42] Effects of curing conditions on strength development of high strength concrete
    Cai, YB
    Kwan, KH
    CHINA OCEAN ENGINEERING, 1997, 11 (01) : 99 - 108
  • [43] The effect of porosity on the strength of foamed concrete
    Kearsley, EP
    Wainwright, PJ
    CEMENT AND CONCRETE RESEARCH, 2002, 32 (02) : 233 - 239
  • [44] Dry shrinkage features of high-strength recycled concrete
    Zeng, Li
    Zhao, Wei
    Tumu Jianzhu yu Huanjing Gongcheng/Journal of Civil, Architectural and Environmental Engineering, 2010, 32 (04): : 125 - 130
  • [45] Effect of Curing Conditions on the Shrinkage of Ultra High-Performance Fiber-Reinforced Concrete
    Han, Song
    Cui, Yefu
    Huang, Hanfeng
    An, Mingzhe
    Yu, Ziruo
    ADVANCES IN CIVIL ENGINEERING, 2018, 2018
  • [46] Study of the effect of the nature of aggregates on the mechanical behaviour of the concrete in hot and dry zones "Contribution of the curing"
    Bendjillali, K.
    Makhloufi, Z.
    IIND INTERNATIONAL SEMINAR INVACO - INNOVATION & VALORIZATION IN CIVIL ENGINEERING & CONSTRUCTION MATERIALS, 2012, 2
  • [47] Influence of Curing Conditions on the Compressive Strength of Foamed Concrete
    Hu, Chi
    Li, Hui
    Liu, Zhongwei
    Wang, Qingyuan
    2016 INTERNATIONAL CONFERENCE ON POWER ENGINEERING & ENERGY, ENVIRONMENT (PEEE 2016), 2016, : 586 - 593
  • [48] Shrinkage Modeling of Concrete Reinforced by Palm Fibres in Hot Dry Environments
    Akchiche, Hamida
    Kriker, Abdelouahed
    TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY (TMREES16), 2017, 1814
  • [49] Effect of frying conditions on shrinkage and porosity of fried potatoes
    Krokida, MK
    Oreopoulou, V
    Maroulis, ZB
    JOURNAL OF FOOD ENGINEERING, 2000, 43 (03) : 147 - 154
  • [50] Mechanical properties of hardened concrete in hot and dry climate
    Korovyakov, Vasiliy
    Reshetneva, Polina
    Solovyov, Vadim
    XXI INTERNATIONAL SCIENTIFIC CONFERENCE ON ADVANCED IN CIVIL ENGINEERING CONSTRUCTION - THE FORMATION OF LIVING ENVIRONMENT (FORM 2018), 2018, 365