The Effects of the Duration of Use on Stiffness of Nickel-Titanium Orthodontic Wires

被引:0
|
作者
Sheibaninia, Ahmad [1 ]
Ghavidel, Parinaz Beikian [2 ]
Mahmoudi, Farhang [3 ]
机构
[1] Islamic Azad Univ, Dent Sch, Dept Orthodont, Tehran Branch,Orthosurg, Tehran, Iran
[2] Islamic Azad Univ, Dent Sch, Dept Endodont, Khorasegan Branch, Esfahan, Iran
[3] Islamic Azad Univ, Dent Sch, Orthodont Postgrad Dept, Tehran Branch, Tehran, Iran
关键词
Stiffness; NiTi; Orthodontic wire; duration of use;
D O I
暂无
中图分类号
R9 [药学];
学科分类号
1007 ;
摘要
Aim and Background: The wire's stiffness might be changed over the usage time. The present in vivo study was conducted to investigate the effects of duration intervals on the stiffness of Nickel-Titanium (NiTi) orthodontic wires with different cross-sections to identify the appropriate size of wires. Materials and Method: The present clinical trial study was conducted on patients who were admitted to the Orthodontics Department of Tehran Dental Branch, Islamic Azad University. Totally, 90 samples of NiTi orthodontic wires, 30 samples with different sizes of 0.014, 0.016, and 0.018 inches were purchased. The measurement of the stiffness had been conducted before, after one month, and after two months of the treatment with 10 samples. The samples were taken to Razi Institute to evaluate archwires' stiffness, using a three-point bending test by Instron tester. Statistical analysis was conducted between and within-group differences using one-way ANOVA. Results: The stiffness of the 0.014, 0.016, and 0.018 inch-NiTi wires was insignificantly reduced from 64.0 +/- 0.8, 78.0 +/- 1.0, and 80.0 +/- 0.7 N/mm(2) before being applied to the mouth to 63.0 +/- 3.0, 77.0 +/- 3.0, and 79.0 +/- 4.0 N/mm(2) after one month and 62.0 +/- 2.0, 76.0 +/- 3.0, and 78.0 +/- 3.0 N/mm(2) after two months of being used, respectively (P=0.8, P= 0.8, and P=0.06, respectively). Conclusion: The stiffness of different cross-sections of NiTi wires did not show any significant changes during the 3 mentioned intervals.
引用
收藏
页码:11 / 14
页数:4
相关论文
共 50 条
  • [21] Characterization of nickel-titanium orthodontic wires by x-ray diffraction.
    Souza, ACRA
    Buono, VTL
    JOURNAL OF DENTAL RESEARCH, 2003, 82 : 181 - 181
  • [22] Influence of surface layer on mechanical and corrosion properties of nickel-titanium orthodontic wires
    Katic, Visnja
    Curkovic, Helena Otmacic
    Semenski, Damir
    Barsic, Gorana
    Marusic, Katarina
    Spalj, Stjepan
    ANGLE ORTHODONTIST, 2014, 84 (06) : 1041 - 1048
  • [23] Properties of Superelastic Nickel-Titanium Wires after Clinical Use
    Alcaraz, Ines
    Moyano, Javier
    Pamies, Ariadna
    Ruiz, Guillem
    Artes, Montserrat
    Gil, Javier
    Puigdollers, Andreu
    MATERIALS, 2023, 16 (16)
  • [24] Differential scanning calorimetry (DSC) analyses of superelastic and nonsuperelastic nickel-titanium orthodontic wires
    Bradley, TG
    Brantley, WA
    Culbertson, BM
    AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS, 1996, 109 (06) : 589 - 597
  • [25] Characterization and coating stability evaluation of nickel-titanium orthodontic esthetic wires: an in vivo study
    Argalji, Nina
    da Silva, Eduardo Moreira
    Cury-Saramago, Adriana
    Mattos, Claudia Trindade
    BRAZILIAN ORAL RESEARCH, 2017, 31
  • [26] Force level of small diameter nickel-titanium orthodontic wires ligated with different methods
    Higa, Rodrigo Hitoshi
    Castanha Henriques, Jose Fernando
    Janson, Guilherme
    Matias, Murilo
    Salvatore de Freitas, Karina Maria
    Henriques, Fernanda Pinelli
    Francisconi, Manoela Favaro
    PROGRESS IN ORTHODONTICS, 2017, 18
  • [27] Composition and transitional temperature range of several nickel-titanium alloy wires in orthodontic treatment
    Isarapatanapong, Rutchadakorn
    Dechkunakorn, Surachai
    Anuwongnukroh, Niwat
    Chiranavanit, Nattiree
    Kajorchaiyakul, Julathep
    Khantachawana, Anak
    APPLIED MECHANICS AND MANUFACTURING TECHNOLOGY, 2011, 87 : 20 - +
  • [28] Determination of corrosion rate of orthodontic wires based on nickel-titanium alloy in artificial saliva
    Katic, V.
    Curkovic, L.
    Bosnjak, M. Ujevic
    Spalj, S.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2014, 45 (02) : 99 - 105
  • [29] Temperature-modulated DSC study of phase transformations in nickel-titanium orthodontic wires
    Brantley, WA
    Iijima, M
    Grentzer, TH
    THERMOCHIMICA ACTA, 2002, 392 : 329 - 337
  • [30] Flexural properties of rectangular nickel-titanium orthodontic wires when used as ribbon archwires
    Lin, Li
    Currier, G. Frans
    Kadioglu, Onur
    Florez, Fernando L. Esteban
    Thompson, David M.
    Khajotia, Sharukh S.
    ANGLE ORTHODONTIST, 2019, 89 (01) : 54 - 63