THE CHARACTERISTICS AND EVALUATION METHOD OF BONDING STRENGTH ON ROLLED STAINLESS CLAD STEEL

被引：0
|
作者：
FUKUDA, T
IWADATE, T
机构：
来源：
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN | 1990年 / 76卷 / 08期
关键词：
D O I：
10.2355/tetsutohagane1955.76.8_1293
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The characteristics of bonding strength of hot rolled stainless clad steel were investigated in conjunction with the microstructures and fracture toughness of the bonding interface and the effect of specimen size on bonding strength. The bonding ratio is the most important parameter for evaluation of the bonding interface. The bonding strength and fracture toughness decrease and crack propagation rate increases with decrease of bonding ratio, which results in higher possibility to debond at the interface with T joint welds. The shear and ram tensile strengths insufficiently reflect the characteristics of bonding interface and are affected by the size of test specimen. The fracture toughness and crack propagation rate of the bonding interface change with the strength of clad stainless steel, and residual stress remained in the interface.
引用
收藏
页码：1293 / 1300
页数：8
相关论文
共 50 条
  • [31] Effect of Surface Roughness on Interface Quality of Hot Rolled Stainless Steel Clad Plate
    Jin H.
    Zhang Z.
    Han M.
    Jing S.
    Zhao D.
    Jin, Herong (ysujhr@ysu.edu.cn), 1600, Cailiao Daobaoshe/ Materials Review (35): : 8151 - 8156
  • [32] Interface Characteristics and Properties of a High-Strength Corrosion-Resistant Stainless Steel Clad Rebar
    Liu, Xuming
    Feng, Guanghong
    Liu, Xin
    Wang, Baoshan
    Zhang, Hongliang
    Ma, Jian
    METALS, 2020, 10 (03)
  • [33] The Effect of Ni Interlayer on the Hot-Rolled and Quenched Stainless Steel Clad Plate
    Lin, Zengmeng
    Wang, Shuai
    He, Jun
    Liu, Baoxi
    Chen, Cuixin
    Feng, Jianhang
    Zhang, Xin
    Fang, Wei
    Yin, Fuxing
    MATERIALS, 2020, 13 (23) : 1 - 15
  • [34] BONDING CONDITION OF ROLLED TITANIUM CLAD STEELS
    YOSHIWARA, S
    KAWANAMI, T
    SUZUKI, K
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (06): : 671 - 677
  • [35] Microstructure and mechanical properties of hot rolled stainless steel clad plate by heat treatment
    Liu, B. X.
    Wang, S.
    Fang, W.
    Ma, J. L.
    Yin, F. X.
    He, J. N.
    Feng, J. H.
    Chen, C. X.
    MATERIALS CHEMISTRY AND PHYSICS, 2018, 216 : 460 - 467
  • [36] BONDING CONDITION OF ROLLED TITANIUM CLAD STEELS
    YOSHIWARA, S
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05): : S755 - S755
  • [37] Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate
    Jin, H. R.
    Zhang, L.
    Dai, C.
    Yi, Y. L.
    STRENGTH OF MATERIALS, 2018, 50 (01) : 29 - 40
  • [38] A novel reduction-bonding process to fabricate stainless steel clad plate
    Jing, Yu-an
    Qin, Yi
    Zang, Xiaoming
    Shang, Qiuyue
    Song, Hua
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 617 : 688 - 698
  • [39] Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate
    H. R. Jin
    L. Zhang
    C. Dai
    Y. L. Yi
    Strength of Materials, 2018, 50 : 29 - 40
  • [40] Mechanical bonding properties and interfacial morphologies of austenitic stainless steel clad plates
    Dhib, Zina
    Guermazi, Noamen
    Ktari, Ahmed
    Gasperini, Monique
    Haddar, Nader
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 696 : 374 - 386
12345