COMPARISON OF BENDING AND ROTATING BENDING FATIGUE OF LOW-CARBON STEEL

被引：0
|
作者：
Angelova, Donka [1 ]
Yordanova, Rozina [1 ]
Krasstev, Dimiter [1 ]
Yordanov, Boyan [1 ]
机构：
[1] Univ Chem Technol & Met Sofia, 8 Kl Ohridski, Sofia 1756, Bulgaria
来源：
STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA | 2010年 / 10卷 / 03期
关键词：
short fatigue crack; low-carbon; low alloyed steel; rotation-bending and pure-bending tests; modelling; fatigue life;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Growth of short cracks on smooth specimen is observed under different loadings in rotation-bending low-carbon, low alloyed steel, and pure-bending fatigue tests were additionally performed. Special features of interaction between the surface cracks and the microstructure of investigated steel are studied. A model is proposed for growth rate of surface cracks vs. their lengths by a system of parabolic and linear functions. Experimental results and models of both fatigue types are compared and some predictions are made, showing a reasonable agreement between the calculated by the model and experimentally obtained fatigue life.
引用
收藏
页码：193 / 197
页数：5
相关论文
共 50 条
  • [41] COMPARISON OF WEAR AND FATIGUE CHARACTERISTICS OF CARBURIZED, CARBONITRIDED AND NITROCARBURIZED LOW-CARBON STEEL
    KIESSLING, L
    HEAT TREATMENT OF METALS, 1979, 6 (04): : 97 - 100
  • [42] SIZE EFFECT ON ROTATING BENDING FATIGUE IN STEELS
    HATANAKA, K
    SHIMIZU, S
    NAGAE, A
    BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1983, 26 (218): : 1288 - 1295
  • [43] ROTATING BENDING FATIGUE TESTS IN A HYDROSTATIC ENVIRONMENT
    GUSTAFSON, CG
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1976, 98 (04): : 380 - 381
  • [44] DEVELOPMENT OF INDUCTION BENDING METHOD FOR THIN-WALL LOW-CARBON STAINLESS-STEEL TUBES
    NAOI, H
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1994, 80 (05): : T81 - T84
  • [45] FATIGUE-STRENGTH OF LOW-CARBON STEEL PLATE WITH A SHARP NOTCH AND A PRE-CRACK UNDER PLANE BENDING AT ELEVATED-TEMPERATURES
    HASEGAWA, N
    HIROSE, M
    KATO, Y
    SATO, Y
    BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1981, 24 (189): : 475 - 482
  • [46] COMPARISON OF UNIAXIAL AND ROTATING BENDING FATIGUE TESTS ON AN ACETAL CO-POLYMER
    CRAWFORD, RJ
    BENHAM, PP
    JOURNAL OF MATERIALS SCIENCE, 1974, 9 (08) : 1297 - 1304
  • [47] Effect of multifunction cavitation on rotating bending fatigue properties of steel rods and its fatigue limit estimation
    Kikuchi, Shoichi
    Minamizawa, Kenta
    Ogi, Takayuki
    Ono, Keisuke
    Yoshimura, Toshihiko
    Ijiri, Masataka
    INTERNATIONAL JOURNAL OF FATIGUE, 2023, 176
  • [48] Effect of grinding depth on the rotating bending fatigue properties of 40Cr steel
    Zhou, Honggen
    Chen, Jianzhi
    Bai, Xiaoxiang
    Li, Guochao
    Guan, Xiaoyan
    Du, Qin
    Li, Ning
    Jing, Xuwen
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2022, 45 (04) : 1292 - 1295
  • [49] Rotating Bending Fatigue Properties of Case Carburized Steel with Different Fractions of Retained Austenite
    Wu Chen
    Xiaofei He
    Wenchao Yu
    Jie Shi
    Maoqiu Wang
    Kefu Yao
    Journal of Materials Engineering and Performance, 2023, 32 : 7960 - 7968
  • [50] Rotating Bending Fatigue Properties of Case Carburized Steel with Different Fractions of Retained Austenite
    Chen, Wu
    He, Xiaofei
    Yu, Wenchao
    Shi, Jie
    Wang, Maoqiu
    Yao, Kefu
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (17) : 7960 - 7968
12345