INFLUENCE OF CALCINING TEMPERATURE ON CUO-MODIFIED (BA0.8SR0.2)(TI0.9ZR0.1)O3 CERAMICS

被引：11
|
作者：
YANG, CF
WU, L
WU, TS
机构：
[1] Department of Electrical Engineering, National Cheng Kung University, Tainan, TWN
来源：
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS | 1992年 / 31卷 / 07期
关键词：
INTERMEDIATE PHASE; RESIDUAL; ENDOTHERM; TETRAGONAL; ABNORMAL GRAIN; DOUBLET;
D O I：
10.1143/JJAP.31.2170
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
The sintering of (Ba0.8Sr0.2)(Ti0.9Zr0.1)O3 (abbreviated as BSTZ) with different amounts of CuO, which is used as the liquid phase promoter for lowering the temperature required to densify BSTZ, is studied using two types of calcined powders. For 1050-degrees-C calcination, the calcined powder contains BaTiO3, SrTiO3 and some raw materials such as ZrO2 and BaCO3. With sintering, some residual raw materials form unknown phases or low-dielectric-constant compounds with CuO, causing the liquid phase effect of CuO to disappear. For 11 70-degrees-C calcination, the calcined powder completely forms ABO3 phases containing (Ba, Sr)TiO3 and BaZrO3. The sintering temperature for densification of ceramics is lowered, and the firing characteristics critically depend on the amount of CuO added and the sintering temperature.
引用
收藏
页码：2170 / 2176
页数：7
相关论文
共 50 条
  • [31] Defects control for improved electrical properties in (Ba0.8Sr0.2)(Zr0.2Ti0.8)O3 films by Co acceptor doping
    Miao, Jun
    Chew, Khian Hooi
    Jiang, Yong
    APPLIED PHYSICS LETTERS, 2011, 99 (23)
  • [32] Dielectric Properties of (Ba0.8-xBi0.2)(Zn0.1Ti0.9)O3 Ceramics for High Temperature Applications
    Raengthon, Natthaphon
    Cann, David P.
    2010 IEEE INTERNATIONAL SYMPOSIUM ON THE APPLICATIONS OF FERROELECTRICS (ISAF), 2010,
  • [33] Fabrication and properties of (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 ceramics and their multilayer piezoelectric actuators
    Long, Peiqing
    Yi, Zhiguo
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2017, 14 (01) : 16 - 21
  • [34] The Influence of Oxygen Plasma Treatment on the Electrical Properties of (Ba0.7Sr0.3)(Ti0.9Zr0.1)O3 Thin Films
    Chen, Kai-Huang
    Yang, Cheng-Fu
    Diao, Chien Chen
    HIGH-PERFORMANCE CERAMICS VI, 2010, 434-435 : 267 - +
  • [35] Morphology controllable synthesis of Ba(Ti0.9Zr0.1)O3 nanoparticles by low temperature aqueous coprecipitation method
    Cheng, X. B.
    Liu, H. X.
    Li, Z.
    Yao, Z. H.
    Liu, Y.
    Yu, Z. Y.
    Cao, M. H.
    MATERIALS TECHNOLOGY, 2008, 23 (04) : 215 - 219
  • [36] Dielectric characteristics investigation of (Ba0.7Sr0.3)(Ti0.9Zr0.1)O3 ferroelectric thin films
    Chen, Kai-Huang
    Wu, Sean
    Huang, Shou-Jen
    INTEGRATED FERROELECTRICS, 2016, 168 (01) : 18 - 24
  • [37] Critical role of CuO doping on energy storage performance and electromechanical properties of Ba0.8Sr0.1Ca0.1Ti0.9Zr0.1O3 ceramics
    Jain, Aditya
    Wang, Y. G.
    Wang, N.
    Wang, F. L.
    CERAMICS INTERNATIONAL, 2020, 46 (11) : 18800 - 18812
  • [38] Structural analysis of Ba0.8Sr0.2Ti0.6Zr0.3Mn0.1O3 ceramics
    Murugesan, G.
    Nandhan, K. R.
    Maruthi, N.
    Muthuraja, A.
    Bhaskar, Saraswathi
    Manigandan, M.
    POWDER DIFFRACTION, 2023, 38 (01) : 27 - 29
  • [39] Competition effects of grain boundary and aging on the hysteresis loop behavior of (Ba0.8Sr0.2)(Ti, Mn)O3 ceramics
    Shi, Xiujing
    Wang, Jiping
    Zhao, Yingying
    Liu, Shujuan
    Zhang, Lixue
    CERAMICS INTERNATIONAL, 2016, 42 (04) : 4734 - 4738
  • [40] Piezoelectric and ferroelectric properties in Ba(Zr,Ti)O3 and CuO-Ba(Zr,Ti)O3 ceramics
    Shin, Dong-Jin
    Kim, Jinhwan
    Jeong, Soon-Jong
    Koh, Jung-Hyuk
    MATERIALS RESEARCH BULLETIN, 2016, 82 : 7 - 10
12345