STABILIZATION OF THE HARDENED CONDITION OF COLD-WORKED LOW-CARBON STEEL

被引：0
|
作者：
GUL, YP
PERCHUN, GI
机构：
来源：
METAL SCIENCE AND HEAT TREATMENT | 1992年 / 34卷 / 1-2期
关键词：
D O I：
10.1007/BF00769878
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Various methods, including cold working (strain hardening), are used for sub-structural hardening. However, substructural hardening of such a type is unstable, especially in heating. In a number of works the stability of steels in the strain hardened condition has been investigated but after small degrees of working. In this work the stability of normal low-carbon straight-carbon steel after working by drawing by a significant degree (80%) was investigated. Stabilization of such a condition of steel is obtained by use of cyclic working by bending.
引用
收藏
页码：119 / 123
页数：5
相关论文
共 50 条
  • [21] NEW PROCEDURE FOR PRODUCTION OF STRENGTHENED COLD-WORKED CARBON-STEEL TUBES
    GUL, YP
    DANCHENKO, VN
    KRUPMAN, YG
    LYAKHOVETSKII, LS
    KHAUSTOV, GI
    STEEL IN THE USSR, 1979, 9 (11): : 583 - 585
  • [22] CHEMICOTHERMAL STRENGTHENING OF NIOBIUM ALLOYS IN THE COLD-WORKED CONDITION
    DUSHIN, YA
    EMELYANOVA, LI
    METAL SCIENCE AND HEAT TREATMENT, 1979, 21 (1-2) : 140 - 143
  • [23] INFLUENCE OF WARM STRAIGHTENING ON PROPERTIES OF COLD-WORKED CARBON-STEEL WIRE
    BABICH, VK
    PIROGOV, VA
    VAKULENKO, IA
    FETISOV, VP
    STEEL IN THE USSR, 1987, 17 (07): : 327 - 328
  • [24] RECOVERY OF COLD-WORKED ALUMINIUM AT LOW TEMPERATURES
    HUTCHISON, TS
    MCBRIDE, SL
    PHYSICS LETTERS, 1962, 2 (03): : 157 - 159
  • [25] INFLUENCE OF HEATING RATE ON TRANSFORMATIONS IN COLD-WORKED STEEL
    MAISTRUK, AY
    TKACHENKO, FK
    MELNICHENKO, AI
    VESELOV, IA
    STEEL IN THE USSR, 1976, 6 (06): : 343 - 344
  • [26] CONTINUOUS MONITORING OF ANNEALING OF COLD-WORKED STEEL STRIP
    DURHAM, SJP
    DREW, RAL
    WILLIAMS, WM
    JOURNAL OF METALS, 1984, 36 (07): : 54 - 54
  • [27] Hydrogen Embrittlement of Hardened Low-carbon Sheet Steel
    Lee, Seok-Jae
    Ronevich, Joseph A.
    Krauss, George
    Matlock, David K.
    ISIJ INTERNATIONAL, 2010, 50 (02) : 294 - 301
  • [28] Micromachining of cold-worked tool steel by nanosecond laser
    Sugar, P.
    Ludrovcova, B.
    Sugarova, J.
    Frncik, M.
    XXIII INTERNATIONAL CONFERENCE ON MANUFACTURING (MANUFACTURING 2018), 2018, 448
  • [29] Manufacture of springs from cold-worked austenitic steel
    Adaskin A.M.
    Russ. Eng. Res., 2009, 11 (1193-1197): : 1193 - 1197
  • [30] Rapid nickel diffusion in cold-worked carbon steel at 320-450 °C
    Arioka, Koji
    Iijima, Yoshiaki
    Miyamoto, Tomoki
    PHILOSOPHICAL MAGAZINE, 2015, 95 (32) : 3577 - 3589
12345