共 50 条
- [1] INFLUENCE OF MICROSTRUCTURE ON THE STRENGTH OF TI-6-PERCENT-AL-4-PERCENT-V ALLOYTETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 (05): : S743 - S743SUENAGA, H
- [2] MODELING OF THE FLOW BEHAVIOR OF A TI-6-PERCENT-AL-4-PERCENT-V ALLOY AT ISOTHERMAL SUPERPLASTIC CONDITIONSSCRIPTA METALLURGICA ET MATERIALIA, 1990, 24 (01): : 185 - 190COMBRES, YLEVAILLANT, C
- [3] SELECTED FRETTING-WEAR-RESISTANT COATINGS FOR TI-6-PERCENT-AL-4-PERCENT-V ALLOYWEAR, 1985, 106 (1-3) : 283 - 301BILL, RC
- [4] Effect of Hot-rolling Temperature on Microstructure and Dynamic Mechanical Properties of Ti-6Al-4V AlloyRARE METAL MATERIALS AND ENGINEERING, 2018, 47 (05) : 1333 - 1340Luo YumengLiu JinxuLi ShukuiCheng Xingwang
- [5] DECREASE OF THE STRENGTH DUE TO DELAYED QUENCHING IN TI-6-PERCENT-AL-4-PERCENT-V ALLOY AND ITS MECHANISMTETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (01): : 131 - 137SUENAGA, HOUCHI, C
- [6] THE FATIGUE-STRENGTH OF POROUS-COATED TI-6-PERCENT-AL-4-PERCENT-V IMPLANT ALLOYJOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 1984, 18 (09): : 1043 - 1058YUE, SPILLIAR, RMWEATHERLY, GC
- [7] ENHANCED SUPERPLASTICITY AND STRENGTH IN MODIFIED TI-6-PERCENT-AL-4-PERCENT-V ALLOYSJOURNAL OF METALS, 1982, 34 (08): : 36 - 36WERT, JAPATON, NE
- [8] EFFECT OF THE DELAY TIME BEFORE QUENCHING ON THE TENSILE-STRENGTH OF TI-6-PERCENT-AL-4-PERCENT-V ALLOY IN STA CONDITIONTETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1586 - 1586SUENAGA, H
- [9] Effect of Hot-Rolling Strategy on the Flow Behavior, Productivity, and Mechanical Performance of Ti-6Al-4V AlloyMATERIALS, 2022, 15 (23)El-Shenawy, EmanMohamed, HusseinReda, Reham
- [10] The effect of hot rolling condition on the anisotropy of mechanical properties in Ti-6Al-4V alloyMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 : 144 - 148Song, Jin-HwaHong, Ki-JungHa, Tae KwonJeong, Hyo Tae