共 50 条
- [1] INFLUENCE OF MICROSTRUCTURE ON THE STRENGTH OF TI-6-PERCENT-AL-4-PERCENT-V ALLOYTETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 (05): : S743 - S743SUENAGA, H
- [2] ENHANCED SUPERPLASTICITY AND STRENGTH IN MODIFIED TI-6AL-4V ALLOYSMETALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1983, 14 (12): : 2535 - 2544WERT, JAPATON, NE
- [3] DECREASE OF THE STRENGTH DUE TO DELAYED QUENCHING IN TI-6-PERCENT-AL-4-PERCENT-V ALLOY AND ITS MECHANISMTETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (01): : 131 - 137SUENAGA, HOUCHI, C
- [4] THE FATIGUE-STRENGTH OF POROUS-COATED TI-6-PERCENT-AL-4-PERCENT-V IMPLANT ALLOYJOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 1984, 18 (09): : 1043 - 1058YUE, SPILLIAR, RMWEATHERLY, GC
- [5] MODELING OF THE FLOW BEHAVIOR OF A TI-6-PERCENT-AL-4-PERCENT-V ALLOY AT ISOTHERMAL SUPERPLASTIC CONDITIONSSCRIPTA METALLURGICA ET MATERIALIA, 1990, 24 (01): : 185 - 190COMBRES, YLEVAILLANT, C
- [6] SELECTED FRETTING-WEAR-RESISTANT COATINGS FOR TI-6-PERCENT-AL-4-PERCENT-V ALLOYWEAR, 1985, 106 (1-3) : 283 - 301BILL, RC
- [7] EFFECT OF THE DELAY TIME BEFORE QUENCHING ON THE TENSILE-STRENGTH OF TI-6-PERCENT-AL-4-PERCENT-V ALLOY IN STA CONDITIONTETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1586 - 1586SUENAGA, H
- [9] EFFECT OF HOT-ROLLING VARIABLES ON THE MECHANICAL-PROPERTIES OF TI-6-PERCENT-AL-4-PERCENT-V ALLOYTETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1585 - 1585SUENAGA, H
- [10] INITIAL MICROSTRUCTURE INFLUENCE ON TI-6-PERCENT-AL-4-PERCENT-V TITANIUM-ALLOYS RHEOLOGY IN THE HOT-WORKING RANGE SIMULATING BY TORSION TESTINGMEMOIRES ET ETUDES SCIENTIFIQUES DE LA REVUE DE METALLURGIE, 1992, 89 (04): : 225 - 236COMBRES, YTAKAHASHI, KCHAZE, AMLEVAILLANT, C