EFFECTS OF BORON ALLOYING ON THE PROPERTIES OF A LOW-CARBON LOW-ALLOYED STEEL .1. THE MECHANICAL-PROPERTIES

被引：0

作者：

PAJU, M ^{[1
]}

HOUGARDY, HP ^{[1
]}

GRABKE, HJ ^{[1
]}

机构：

[1] MAX PLANCK INST IRON RES,D-4000 DUSSELDORF,FED REP GER

来源：

SCANDINAVIAN JOURNAL OF METALLURGY | 1989年 / 18卷 / 05期

关键词：

Iron and Steel Metallography--Precipitation - Microscopic Examination--Transmission Electron Microscopy;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The effects of boron alloying on the mechanical properties of a low-carbon low-alloyed steel were studied. The high purity laboratory steels alloyed with titanium and different amounts of boron were austenitised, quenched in brine, and tempered at 200°C or 500°C. The tensile and impact properties were investigated. The initiation and propagation of fracture was studied with a scanning electron microscope. In the steels studied the cleavage fracture is initiated by cracking of Ti(C,N) precipitates which thus control the impact toughness. Boron alloying did influence tensile or impact properties. Four alloys with a basic chemical composition corresponding to the German steel standard 20 MnCr 5 (DIN 17210) were used in the study.

引用

页码：235 / 242

页数：8

共 50 条

[41] Cold plastic deformation effects on the mechanical properties and corrosion behaviour of low-alloyed (2% Cr) steel
Ivanova, D. I.
Ilieva, G. P.
Fachikov, L. B.
BULGARIAN CHEMICAL COMMUNICATIONS, 2017, 49 : 54 - 58
[42] A novel design to enhance the amount of retained austenite and mechanical properties in low-alloyed steel
Ding, Ran
Tang, Di
Zhao, Aimin
SCRIPTA MATERIALIA, 2014, 88 : 21 - 24
[43] THE MECHANICAL-PROPERTIES OF LOW-CARBON HIGH MANGANESE MICROALLOYED STEELS
BHOLE, SD
YU, H
CANADIAN METALLURGICAL QUARTERLY, 1991, 30 (01) : 45 - 54
[44] Disordering during tempering of low-alloyed low-carbon steel with quasieutectoid structure ("degenarated" paerlite)
Izotov, VI
Yedneral, AF
Filippov, GA
FIZIKA METALLOV I METALLOVEDENIE, 1997, 84 (04): : 71 - 84
[45] MECHANICAL-PROPERTIES OF LOW-CARBON MANGANESE-NICKEL STEELS
KUHNE, J
NEUE HUTTE, 1979, 24 (07): : 253 - 257
[46] Fast Salt Bath Heat Treatment for a Bainitic/Martensitic Low-Carbon Low-Alloyed Steel
Julia Urbanec
Ari Saastamoinen
Seppo Kivivuori
Seppo Louhenkilpi
Metallurgical and Materials Transactions A, 2015, 46 : 5343 - 5349
[47] The Effect of Size and Shape of Austenite Grains on the Mechanical Properties of a Low-Alloyed TRIP Steel
Davut, Kemal
Zaefferer, Stefan
STEEL RESEARCH INTERNATIONAL, 2012, 83 (06) : 584 - 589
[48] The Influence of Ti/N Ratio on the Effective Boron and Mechanical Properties of Low Carbon Boron Alloyed bainitic steel
Zhang, Tao
Hou, Huaxing
Chen, Junping
FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE IV, PTS 1-5, 2014, 496-500 : 392 - +
[49] MECHANICAL-PROPERTIES OF AS ROLLED EXTRA LOW-CARBON MAR STEELS
PATWARDHAN, AK
SCRIPTA METALLURGICA, 1976, 10 (08): : 677 - 680
[50] MICROSTRUCTURES AND MECHANICAL-PROPERTIES OF BAINITIC STEELS WITH LOW-CARBON CONTENTS
DESALOS, Y
LAURENT, R
MEMOIRES SCIENTIFIQUES DE LA REVUE DE METALLURGIE, 1979, 76 (02): : 73 - 107

← 1 2 3 4 5 →