CONTROL OF THICKNESS AND EVENNESS AT A COMBINED 4-HIGH CLUSTER ROLL REVERSING COLD-ROLLING MILL

被引：0

作者：

WIEDEMER, K ^{[1
]}

机构：

[1] GESAMT HSCH SIEGEN,FACH BEREICH MASCHINENTECH,SIEGEN,FED REP GER

来源：

METALL | 1975年 / 29卷 / 04期

关键词：

PRODUCTION CONTROL;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The discussion, with reference to a schematic drawing, is based on experience in rolling steel, copper, brass, and bronze strip from 2. 5 mm thickness down to 0. 08 mm. Maximum width is 350 mm and rolling speed is 500 m/min. Thickness tolerance must not exceed plus or minus 2 mu m.

引用

页码：365 / 367

页数：3

共 50 条

[31] ELECTRICAL-EQUIPMENT FOR A 4-HIGH COLD ROLLING-MILL IN GREECE
HIGGINS, DF
BROWN BOVERI REVIEW, 1977, 64 (10): : 634 - 635
[32] ELASTIC BEHAVIOUR OF A 4-HIGH COLD ROLLING MILL AT FINISH-ROLLING OF ALUMINIUM FOIL
EMICKE, O
ZOUHAR, G
BECKER, H
METALL, 1967, 21 (04): : 292 - &
[33] EFFECTS OF NI ADDITION ON THE HARDENING DEPTH OF COLD-ROLLING MILL ROLL
ISHII, M
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (04): : S303 - S303
[34] A MATHEMATICAL-MODEL FOR COMPUTING THE DISTRIBUTION OF LOADS AND THICKNESS IN THE WIDTH DIRECTION OF A STRIP ROLLED IN 4-HIGH COLD-ROLLING MILLS
PAWELSKI, O
TEUTSCH, H
ENGINEERING FRACTURE MECHANICS, 1985, 21 (04) : 853 - 859
[35] APPLICATION OF HIGH CHROME IRON ROLL FOR COLD-ROLLING
KAWAMOTO, T
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (04): : S312 - S312
[36] CHARACTERISTICS OF 12 HI CLUSTER MILL .2. CHARACTERISTICS OF COLD-ROLLING OF CLUSTER MILL
YAMADA, Y
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (04): : S372 - S372
[37] APPLICATION OF HIGH-GRADIENT MAGNETIC SEPARATOR TO COLD-ROLLING MILL LUBRICANT AND ROLL COOLANT
KAWASHIMA, K
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : 1260 - 1260
[38] Investigation Into Roll Thrust Bearing Damage and Modeling of Roll Thrust Forces for the 4-High Reversing Rougher of a Hot Strip Mill
Iron and Steel Technology, 2015, 12 (01): : 267 - 275
[39] Research and application of computer control system for aluminium single-stand 4-high cold rolling mill
Zhang, Fei
Wang, Xiang
Zong, Shengyue
Xiang, Xiaofei
JOURNAL OF ENGINEERING-JOE, 2016, 2016 (11): : 415 - 422
[40] THICKNESS VARIATION AT TRAILING END OF COIL ON CONTINUOUS COLD-ROLLING MILL
LIFSHITS, LA
STEEL IN THE USSR, 1978, 8 (11): : 638 - 639

← 1 2 3 4 5 →