New Method for Quality Evaluation of Mc-Si Wafers Implied in the Fabrication of Photovoltaic Cells

被引：0

作者：

Fathi, Mohamed ^{[1
]}

Chikouche, Ahmed ^{[1
]}

机构：

[1] UDES, Solar Equipments Dev Unit, Route Natl N11,Bouismail,BP 386, Tipasa 42415, Algeria

来源：

JORDAN JOURNAL OF MECHANICAL AND INDUSTRIAL ENGINEERING | 2010年 / 4卷 / 01期

关键词：

Multicrystalline Silicon Wafers; Crystalline Defect Density; Four Probes Technique; Chemical Delineation; Photovoltaic;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

We have developed a new method for quality evaluation of mc-Si wafers implied in the fabrication of photovoltaic cells. This method is based on the exploitation of the variation of the sheet resistance (Delta R square) of chemically etched wafers. We have presented specific classification connecting directly Delta R square bands to the crystalline defect types and densities. These results are in good accordance to physically observed defect density and grain boundaries repartition. Previously, with special process experimentation, we have shown that the best sensitivity to crystalline extended defects in mc-Si material is supported by the "Secco Etch" chemical solution. This chemical is very sensitive to crystalline defects and was applied to the development of our new characterization method of mc-Si wafers. (C) 2010 Jordan Journal of Mechanical and Industrial Engineering. All rights reserved

引用

页码：151 / 154

页数：4

共 50 条

[31] Evaluation of the environmental performance of sc-Si and mc-Si PV systems in Korea
Kim, Byung-ju
Lee, Ji-yong
Kim, Kyung-hwan
Hur, Tak
SOLAR ENERGY, 2014, 99 : 100 - 114
[32] Investigation of degradation in solar cells from different mc-Si materials
Junge, J.
Herguth, A.
Hahn, G.
Kressner-Kiel, D.
Zierer, R.
PROCEEDINGS OF THE SILICONPV 2011 CONFERENCE (1ST INTERNATIONAL CONFERENCE ON CRYSTALLINE SILICON PHOTOVOLTAICS), 2011, 8 : 52 - 57
[33] Possible Candidates for Impurities in mc-Si Wafers Responsible for Light-Induced Lifetime Degradation and Regeneration
Bredemeier, Dennis
Walter, Dominic C.
Schmidt, Jan
SOLAR RRL, 2018, 2 (01):
[34] Rating and sorting of mc-Si as-cut wafers in solar cell production using PL imaging
Haunschild, Jonas
Reis, Isolde E.
Chipei, Teodora
Demant, Matthias
Thaidigsmann, Benjamin
Linse, Michael
Rein, Stefan
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2012, 106 : 71 - 75
[35] Influence of chromium on minority carrier properties in intentionally contaminated n-type mc-Si wafers
Martinuzzi, S.
Warchol, F.
Dubois
Enjalbert, N.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2009, 159-60 : 253 - 255
[36] Influence of Back Contact Annealing Temperature in the mc-Si Solar Cell Fabrication Process
Aravindan, G.
Sanmugavel, S.
Nagarajan, S. G.
Kesavan, V
Srinivasan, M.
Ramasamy, P.
SILICON, 2022, 14 (15) : 9751 - 9762
[37] Photoluminescence Imaging and LBIC Characterization of Defects in mc-Si Solar Cells
Sanchez, L. A.
Moreton, A.
Guada, M.
Rodriguez-Conde, S.
Martinez, O.
Gonzalez, M. A.
Jimenez, J.
JOURNAL OF ELECTRONIC MATERIALS, 2018, 47 (09) : 5077 - 5082
[38] Photoluminescence Imaging and LBIC Characterization of Defects in mc-Si Solar Cells
L. A. Sánchez
A. Moretón
M. Guada
S. Rodríguez-Conde
O. Martínez
M. A. González
J. Jiménez
Journal of Electronic Materials, 2018, 47 : 5077 - 5082
[39] Influence of Back Contact Annealing Temperature in the mc-Si Solar Cell Fabrication Process
G. Aravindan
S. Sanmugavel
S. G. Nagarajan
V. Kesavan
M. Srinivasan
P. Ramasamy
Silicon, 2022, 14 : 9751 - 9762
[40] Contribution of the luminescence phenomena of nc-Si to the performances of the industrial mc-Si solar cells
Zerga, A.
Benyelles, K.
ADVANCES IN INNOVATIVE MATERIALS AND APPLICATIONS, 2011, 324 : 465 - 468

← 1 2 3 4 5 →