EVALUATION OF SOME TITANIUM-BASED CERAMIC COATINGS ON HIGH-SPEED STEEL CUTTING TOOLS

被引：24
|
作者：
RONKAINEN, H
NIEMINEN, I
HOLMBERG, K
LEYLAND, A
MATTHEWS, A
MATTHES, B
BROSZEIT, E
机构：
[1] UNIV HULL,HULL HU6 7RX,N HUMBERSIDE,ENGLAND
[2] TH DARMSTADT,W-6100 DARMSTADT,GERMANY
来源：
SURFACE & COATINGS TECHNOLOGY | 1991年 / 49卷 / 1-3期
关键词：
D O I：
10.1016/0257-8972(91)90102-3
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Titanium-based ceramic coatings, comprising Ti(B,N) and (Ti,Al)N, were produced by d.c. plasma-assisted electron beam physical vapour deposition and r.f.-magnetron sputtering on high speed steel (HSS) tools. Longitudinal turning tests were carried out using the international standard procedure ISO 3685-1977. HSS tool inserts were employed to cut calcium-treated (MoCN 206 M) cementation steel. The main cutting fluid was an emulsion with good cooling properties. Comparative drilling tests and turning tests with conventional (MoCN 206) cementation steel and aluminium alloy workpieces were also carried out as well as tests with a cutting fluid containing EP-additives. Reference materials in cutting tests were uncoated and commercially TiN coated HSS inserts. The new titanium-based coatings improved the tool life considerably even when compared with TiN coated tools. In particular, (Ti,Al)N coatings showed excellent resistance against flank wear in steel cutting conditions, improving the wear resistance of HSS tools two to three times when compared with TiN. Ti(B,N) coatings also had encouraging initial results, although variations in thickness and the brittle nature of the coating deteriorated their performance. The failure mechanisms of the new coatings differed to some extent from those observed with TiN coatings in metal cutting.
引用
收藏
页码：468 / 473
页数：6
相关论文
共 50 条
  • [21] Evaluation of the optimal cutting performance of high-speed steel and tungsten carbide cutting tools in the machining of AISI 304 steel
    Aboloje, Alfred Eviwanrherhe
    Sada, Samuel Oro-oghene
    Ekpu, Mathias
    Eyenubo, Jonathan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 130 (7-8): : 3609 - 3617
  • [22] Evaluation of the optimal cutting performance of high-speed steel and tungsten carbide cutting tools in the machining of AISI 304 steel
    Alfred Eviwanrherhe Aboloje
    Samuel Oro-oghene Sada
    Mathias Ekpu
    Jonathan Eyenubo
    The International Journal of Advanced Manufacturing Technology, 2024, 130 : 3609 - 3617
  • [23] CUTTING TOOLS MADE FROM HIGH-SPEED STEEL - EFFECTS ON THE CUTTING CAPACITY
    WECKENER, HD
    WERKSTATTSTECHNIK ZEITSCHRIFT FUR INDUSTRIELLE FERTIGUNG, 1980, 70 (10): : 625 - &
  • [24] REDUCING WEAR OF HIGH-SPEED STEEL CUTTING TOOLS BY SPARK HARDENING
    VAIDYANATHAN, S
    WEAR, 1970, 16 (04) : 255 - +
  • [25] Heat-treatment and properties of high-speed steel cutting tools
    Shi Shaojun
    Zeng Xianping
    Sun Chengtong
    4TH INTERNATIONAL CONFERENCE ON APPLIED MATERIALS AND MANUFACTURING TECHNOLOGY, 2018, 423
  • [26] TEMPERATURE DISTRIBUTION IN CUTTING WEDGE ZONE OF HIGH-SPEED STEEL TOOLS
    SINOPALNIKOV, VA
    GURIN, VD
    RUSSIAN ENGINEERING JOURNAL, 1977, 57 (01): : 43 - 45
  • [27] Electrochemical evaluation of the corrosion behavior of steel coated with titanium-based ceramic layers
    Alkhateeb, E.
    Ali, R.
    Virtanen, S.
    Popovska, N.
    SURFACE & COATINGS TECHNOLOGY, 2011, 205 (8-9): : 3006 - 3011
  • [28] Attainable Surface Quality in High-Speed Turning with Ceramic Cutting Tools.
    Icks, G.
    TZ fur Metallbearbeitung, 1981, 75 (07): : 13 - 16
  • [29] Effect of the Chamfer Angle in High-Speed Turning with Ceramic Cutting tools.
    Icks, G.
    TZ fur Metallbearbeitung, 1980, 74 (02): : 33 - 34
  • [30] Special features of the composition, structure and properties of high-speed steels for cutting tools with ion-plasma coatings based on titanium nitride
    Kremnev, L. S.
    Vinogradova, L. A.
    Onegina, A. K.
    Sapronov, I. Yu
    METAL SCIENCE AND HEAT TREATMENT, 2012, 54 (1-2) : 3 - 7
12345