OXIDE COATINGS ON TITANIUM PRODUCED BY OXIDATION IN FLUIDIZED BED

被引:1
|
作者
Jasinski, J. [1 ]
Mendzik, K. [1 ]
Tatar, M. [1 ]
Szota, M. [1 ]
机构
[1] Czestochowa Tech Univ, Fac Mat Proc Technol & Appl Phys, Inst Mat Engn, Czestochowa, Poland
来源
ADVANCES IN MATERIALS SCIENCE | 2008年 / 8卷 / 01期
关键词
titanium; oxidation; fluidized bed; adhesion;
D O I
10.2478/v10077-008-0006-5
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The main product of a process of titanium oxidation is titanium oxide, which covers the titanium surface. Moreover oxidation in fluidized bed in temperature range of 600-700 degrees C influences on outer layers of titanium specimen, where a diffusion layer of oxygen is observed. Microstructures of titanium with visible oxide coatings on its surface after thermo-chemical treatment are described. Microhardness measurements of titanium surface layers after oxidation process were made with a Knoop microhardness tester and showed significant differences according to oxidation parameters. Finally, the surfaces of titanium after oxidation in fluidized bed were scratched in aim to measure their adhesion to the substrate surface.
引用
收藏
页码:52 / 57
页数:6
相关论文
共 50 条
  • [31] Photocatalytic oxidation of cyanide ions by alkoxy-derived titanium oxide coatings
    Hudson, SP
    Shirkhanzadeh, M
    Pickles, CA
    TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY, 2000, 109 : C137 - C140
  • [32] OXIDATION OF HYDROCARBONS IN A FLUIDIZED-BED OF CATALYST
    SHAKHTAK.T
    SOVIET SCIENCE REVIEW, 1972, 3 (05): : 281 - &
  • [33] Oxidation of iron powder in a fluidized bed reactor
    Bodas, MG
    Dash, DR
    Sivaramakrishnan, CS
    MATERIALS & DESIGN, 1996, 17 (03): : 167 - 172
  • [34] Biological sulfide oxidation in a fluidized bed reactor
    Annachhatre, AP
    Suktrakoolvait, S
    ENVIRONMENTAL TECHNOLOGY, 2001, 22 (06) : 661 - 672
  • [35] Oxidation of magnesium particles in a fluidized bed reactor
    Wittmann, Alice
    Wronski, Tomasz
    Shafirovich, Evgeny
    Schonnenbeck, Cornelius
    Brillard, Alain
    Brilhac, Jean-Francois
    Tschamber, Valerie
    COMBUSTION AND FLAME, 2025, 272
  • [36] Formation of titanium oxide coatings on NiTi shape memory alloys by selective oxidation
    Pohl, M.
    Glogowski, T.
    Kuehn, S.
    Hessing, C.
    Unterumsberger, F.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 481 : 123 - 126
  • [37] OXIDATION OF METHANE TO FORMALDEHYDE IN A FLUIDIZED BED REACTOR
    MCCONKEY, BH
    WILKINSON, PR
    INDUSTRIAL & ENGINEERING CHEMISTRY PROCESS DESIGN AND DEVELOPMENT, 1967, 6 (04): : 436 - +
  • [38] Mathematical Simulation on Oxidation of Ilmenite in Fluidized Bed
    孙康
    RAREMETALS, 1996, (01) : 51 - 58
  • [39] Composition, structure and mechanical properties of metal oxide coatings produced on titanium using plasma spraying and modified by micro-arc oxidation
    Koshuro, Vladimir
    Fomin, Aleksandr
    Rodionov, Igor
    CERAMICS INTERNATIONAL, 2018, 44 (11) : 12593 - 12599
  • [40] Fluidized-bed combustion synthesis of titanium nitride
    Lee, KO
    Cohen, JJ
    Brezinky, K
    PROCEEDINGS OF THE COMBUSTION INSTITUTE, 2000, 28 : 1373 - 1380