SIZE EFFECT ON ROTATING BENDING FATIGUE IN STEELS

被引：11
|
作者：
HATANAKA, K [1 ]
SHIMIZU, S [1 ]
NAGAE, A [1 ]
机构：
[1] TOYOTA MOTOR CO LTD,TOYOTA 471,JAPAN
来源：
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS | 1983年 / 26卷 / 218期
关键词：
D O I：
10.1299/jsme1958.26.1288
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
JIS SF 50 forged and JIS SCMn 2A cast steels were used as a homogeneous and a faulty material, respectively. Rotating bending fatigue tests were performed for the specimen sizes from 8 to 40 mm in diameter. The fatigue limits of these specimens are discussed in terms of the cyclic strain measured on specimen surface and the scatter in fatigue strength due to defects.
引用
收藏
页码：1288 / 1295
页数：8
相关论文
共 50 条
  • [31] Stress gradient as a size effect in fatigue life determination for alternating bending
    Kurek, Andrzej
    Lagoda, Tadeusz
    Kurek, Marta
    INTERNATIONAL JOURNAL OF FATIGUE, 2021, 153 (153)
  • [32] Effect of the Morphology and Size of Iron Carbide on the Fatigue Strength of Carbon Steels
    Vakulenko, I. A.
    Perkov, O. N.
    RUSSIAN METALLURGY, 2008, 2008 (03): : 225 - 228
  • [33] DETERMINATION OF SIZE EFFECT IN FATIGUE TESTING VACUUM-POURED STEELS
    KOKOTAIL.IV
    KUSLITSK.AB
    STAROVOI.YA
    KARPENKO, GV
    INDUSTRIAL LABORATORY, 1968, 34 (01): : 114 - &
  • [34] Bending fatigue of gear teeth of conventional and isotropic steels
    Temmel, C.
    Karlsson, B.
    Leicht, V.
    HTM-JOURNAL OF HEAT TREATMENT AND MATERIALS, 2009, 64 (02): : 80 - 88
  • [35] Effect of grinding depth on the rotating bending fatigue properties of 40Cr steel
    Zhou, Honggen
    Chen, Jianzhi
    Bai, Xiaoxiang
    Li, Guochao
    Guan, Xiaoyan
    Du, Qin
    Li, Ning
    Jing, Xuwen
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2022, 45 (04) : 1292 - 1295
  • [36] Effect of contact stress on rotating bending fretting fatigue life of railway axle steel
    Song, Chuan
    Liu, Jian-Hua
    Peng, Jin-Fang
    Zhang, Lin
    Zhou, Yan
    Zhu, Min-Hao
    Cailiao Gongcheng/Journal of Materials Engineering, 2014, (02): : 34 - 38
  • [37] Effect of oil environment of fatigue strength of specimen with circumferential notch (rotating bending and torsion)
    Kawagoishi, Norio
    Nisitani, Hironobu
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1988, 54 (504): : 1489 - 1494
  • [38] Anisotropy of Rotating Bending Fatigue Properties of α+β Titanium Alloy
    Chen S.
    Huang S.
    Ma Y.
    Yang J.
    Wang Q.
    Liang Y.
    Lei J.
    Yang R.
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2024, 53 (02): : 435 - 448
  • [39] Rotating bending fatigue fracture from stealth defect
    Masaki, Kiyotaka
    Zairyo/Journal of the Society of Materials Science, Japan, 2021, 70 (11): : 839 - 845
  • [40] Rotating bending fatigue property and fractography for high strength steels and carbon steel over ultra wide life region
    Takeda, Mitsuhiro
    Sakai, Tatsuo
    Oguma, Noriyasu
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2002, 68 (06): : 977 - 984
12345