EFFECTS OF CARBON CONTENT, ROLLING CONDITION AND COOLING RATE ON THE MECHANICAL-PROPERTIES OF AS-ROLLED HIGH-STRENGTH LOW-ALLOY STEEL

被引：0

作者：

OKAMOTO, S

TOYAMA, M

INOUE, T

机构：

[1] KOBE STEEL LTD,DEPT TECH INFORMAT & PLANNING,CHUO KU,KOBE 651,JAPAN

[2] KOBE STEEL LTD,MAT RES LABS,CTR MAT DEV,CHUO KU,KOBE 651,JAPAN

来源：

TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN | 1987年 / 27卷 / 06期

关键词：

IRON AND STEEL METALLOGRAPHY - Ferrite - ROLLING MILL PRACTICE - Hot Rolling - STEEL TESTING;

D O I：

10.2355/isijinternational1966.27.474

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The effects of carbon content, rolling condition and cooling rate on the mechanical properties were examined for non heat-treated steels of 80 to about 100 kgf/mm**2 tensile strength grade. Titanium, boron, and niobium microalloyed 0. 1%C-1. 8%Mn steel was found to provide a good combination of high strength and high ductility after hot rolling. The controlled rolling produces a fine acicular ferrite structure and consequently improves the toughness more effectively than any other rolling conditions.

引用

页码：474 / 477

页数：4

共 50 条

[21] CONTINUOUS COOLING TRANSFORMATIONS AND MICROSTRUCTURES IN A LOW-CARBON, HIGH-STRENGTH LOW-ALLOY PLATE STEEL
THOMPSON, SW
COLVIN, DJ
KRAUSS, G
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1990, 21 (06): : 1493 - 1507
[22] Effect of Thermomechanical Treatment on Microstructure and Mechanical Properties of High-Strength Low-Alloy Steel
Lugovskaya, A.
Yanushkevich, Z.
Odnobokova, M.
Belyakov, A.
Kaibyshev, R.
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2017 (AMHS'17), 2017, 1909
[23] PRODUCTION OF HIGH-STRENGTH LOW-ALLOY STEELS IN THE HOT-ROLLED CONDITION.
Niekerk, Van E.H.
Journal of The South African Institute of Mining and Metallurgy, 1984, 84 (04): : 103 - 107
[24] HIGH-STRENGTH, LOW-ALLOY STEEL CASTINGS
MISKA, KH
MATERIALS ENGINEERING, 1985, 101 (01): : 37 - 40
[25] Effect of hot rolling process parameters on the microstructure and mechanical properties of continuously cooled low-carbon high-strength low-alloy (HSLA) steel
Kucukakarsu, Furkan Yilmaz
Ayhan, Ismail Irfan
Alan, Emre
Tastemur, Demet
Gunduz, Suleyman
MATERIALS TESTING, 2022, 64 (08) : 1136 - 1149
[26] EFFECT OF SHORT-TIME AUSTENITIZATION ON THE MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF A NIOBIUM BEARING HIGH-STRENGTH LOW-ALLOY STEEL
PANDA, AK
GANGULY, RI
MISRA, S
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1984, 37 (02): : 135 - 140
[27] CHARACTERIZATION OF A CR-MO-B HIGH-STRENGTH, LOW-ALLOY STEEL - RELATIONSHIP BETWEEN THE MICROSTRUCTURE AND MECHANICAL-PROPERTIES
SAMUEL, FH
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1988, 102 (02): : 259 - 269
[28] ROLLING OF HIGH-STRENGTH LOW-ALLOY SKELP AT IPSCO
HAMRE, EC
CIM BULLETIN, 1977, 70 (784): : 142 - 142
[29] THE EFFECTS OF SILICON AND NICKEL ADDITIONS ON THE MECHANICAL-PROPERTIES OF A 0.4 CARBON LOW-ALLOY STEEL
GARRISON, WM
SCRIPTA METALLURGICA, 1982, 16 (07): : 877 - 880
[30] CRYSTALLOGRAPHY OF BAINITE IN A LOW-CARBON LOW-ALLOY HIGH-STRENGTH STEEL
OHMORI, Y
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1973, 13 (01) : 56 - 62

← 1 2 3 4 5 →