STUDY OF MICROSTRUCTURE, HARDNESS AND WEAR PROPERTIES OF SAND CAST Cu-4Ni-6Sn BRONZE ALLOY

被引：0
|
作者：
Ilangovan, S. [1 ]
机构：
[1] Amrita Univ, Amrita Sch Engn, Amrita Vishwa Vidyapeetham, Ettimadai Campus, Coimbatore, Tamil Nadu, India
来源：
JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY | 2015年 / 10卷 / 04期
关键词：
Cu-Ni-Sn; Spinodal bronze; Aging treatment; Modulated microstructure;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An alloy of Cu-4Ni-6Sn was cast in the sand moulds. The cast rods were homogenized, solution heat treated and aged for different periods of time. The specimens were prepared from the rods to study the microstructure, microhardness and wear properties. It was found that the aging process increases the hardness of the alloy significantly. It was due to the change in the microstructure of the alloy. Further, spinodal decomposition and the ordering reaction take place during the aging treatment. Specific wear rate was found to decrease with the hardness of the alloy. Coefficient of friction remains constant and is not affected by the aging process.
引用
收藏
页码：526 / 532
页数：7
相关论文
共 50 条
  • [31] Effect of V addition on microstructure and properties of Cu-7.5Ni-5Sn alloy
    Zheng, Li-Yuan
    Xiao, Peng
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2015, 36 (07): : 108 - 113
  • [32] Effect of Si addition on the microstructure and properties of Cu-15Ni-8Sn alloy
    Wang, Yan-Hui
    Wang, Ming-Pu
    Hong, Bin
    Li, Zhou
    Xu, Gen-Ying
    Jinshu Rechuli/Heat Treatment of Metals, 2003, 28 (01):
  • [33] Effect of Sr on microstructure, tensile properties and wear behavior of as-cast Mg-6Zn-4Si alloy
    Cong, Mengqi
    Li, Ziquan
    Liu, Jinsong
    Li, Shaohua
    MATERIALS & DESIGN, 2014, 53 : 430 - 434
  • [34] Microstructure evolution and mechanical properties of Cu-9Ni-6Sn alloy during continuous cold deformation process
    Wang, Meng
    Li, Handong
    Jiang, Yanbin
    Fang, Mei
    Xiao, Zhu
    Jia, Yanlin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 908
  • [35] The role of boron content in high alloy white cast iron (Ni-Hard 4) on microstructure, mechanical properties and wear resistance
    Col, Mustafa
    Koc, Funda Gul
    Oktem, Hasan
    Kir, Durmus
    WEAR, 2016, 348 : 158 - 165
  • [36] Effects of Thermal Variables of Solidification on the Microstructure and Hardness of the Manganese Bronze Alloy Cu-24Zn-6Al-4Mn-3Fe
    Lobo, Flavia Goncalves
    da Silva, Marcio Rodrigues
    dos Santos, Vinicius Torres
    do Nascimento, Paulo Henrique Tedardi
    Teram, Rogerio
    Nascimento, Mauricio Silva
    Tercini, Marcela Bergamaschi
    Seixas, Daniel Ayarroio
    dos Santos, Givanildo Alves
    Paez, Alejandro Zuniga
    METALS, 2024, 14 (10)
  • [37] Effect of rare earth on the microstructure and mechanical properties of as-cast Cu-30Ni alloy
    MAO Xiangyang
    RareMetals, 2009, 28 (06) : 590 - 595
  • [38] Effect of rare earth on the microstructure and mechanical properties of as-cast Cu-30Ni alloy
    Xiangyang Mao
    Feng Fang
    Jianqing Jiang
    Rongsheng Tan
    Rare Metals, 2009, 28 : 590 - 595
  • [39] Effect of rare earth on the microstructure and mechanical properties of as-cast Cu-30Ni alloy
    Mao Xiangyang
    Fang Feng
    Jiang Jianqing
    Tan Rongsheng
    RARE METALS, 2009, 28 (06) : 590 - 595
  • [40] Determination on the Effect of Ti Addition on the Microstructural, Mechanical and Wear Behavior of Cu–6Sn Alloy in as—Cast Condition
    M. C. Akshay
    V. R. Aravind Senan
    K. S. Vignesh Surej
    B. Akhil
    Karthik V. Shankar
    Balakrishnan Shankar
    Transactions of the Indian Institute of Metals, 2020, 73 : 309 - 318
12345