STUDY OF MICROSTRUCTURE, HARDNESS AND WEAR PROPERTIES OF SAND CAST Cu-4Ni-6Sn BRONZE ALLOY

被引：0
|
作者：
Ilangovan, S. [1 ]
机构：
[1] Amrita Univ, Amrita Sch Engn, Amrita Vishwa Vidyapeetham, Ettimadai Campus, Coimbatore, Tamil Nadu, India
来源：
JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY | 2015年 / 10卷 / 04期
关键词：
Cu-Ni-Sn; Spinodal bronze; Aging treatment; Modulated microstructure;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An alloy of Cu-4Ni-6Sn was cast in the sand moulds. The cast rods were homogenized, solution heat treated and aged for different periods of time. The specimens were prepared from the rods to study the microstructure, microhardness and wear properties. It was found that the aging process increases the hardness of the alloy significantly. It was due to the change in the microstructure of the alloy. Further, spinodal decomposition and the ordering reaction take place during the aging treatment. Specific wear rate was found to decrease with the hardness of the alloy. Coefficient of friction remains constant and is not affected by the aging process.
引用
收藏
页码：526 / 532
页数：7
相关论文
共 50 条
  • [1] An investigation on the effect of process parameters on microstructure, hardness and wear properties of surface modified Cu-Sn bronze alloy
    Paul, Cherian
    Sellamuthu, R.
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 58 - 62
  • [2] Microstructure, Hardness and Wear Properties of Functionally Graded Cu-Sn-Ni Alloy Developed by Friction Stir Processing
    Krishnan, Amal
    Paul, Cherian
    INTERNATIONAL CONFERENCE ON APPLIED MECHANICS AND OPTIMISATION (ICAMEO-2019), 2019, 2134
  • [3] Effect of Ni/Sn ratio on microstructure and properties of Cu-Ni-Sn-P alloy
    Chen, Xiaokang
    Xiao, Xiangpeng
    Yuan, Dawei
    Chen, Jinshui
    Wu, Yu
    SCIENTIFIC REPORTS, 2024, 14 (01):
  • [4] EFFECTS OF TIN ON HARDNESS, WEAR RATE AND COEFFICIENT OF FRICTION OF CAST CU-NI-SN ALLOYS
    Ilangovan, S.
    Sellamuthu, R.
    JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2013, 8 (01) : 34 - 43
  • [5] MEASUREMENT OF THE VARIATION OF MECHANICAL PROPERTIES WITH AGING TEMPERATURES FOR SAND CAST Cu-5Ni-5Sn ALLOY
    Ilangovan, S.
    Sellamuthu, R.
    JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2016, 11 (11) : 1609 - 1619
  • [6] Microstructure and properties of wear resistant Al-Sn-Cu bearing alloy
    Zhang, Sheng-Cheng
    Pan, Qing-Lin
    Li, Bo
    Huang, Xing
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2015, 25 (12): : 3327 - 3335
  • [7] A comparative study of microstructure and mechanical properties among Cu/Sn/Cu, Ni/Sn/Ni and Cu/Sn/Ni solder joints
    Wang, Bo
    Wu, Fengshun
    Wu, Yiping
    An, Bing
    Liu, Hui
    Zou, Jian
    SOLDERING & SURFACE MOUNT TECHNOLOGY, 2011, 23 (01) : 40 - 46
  • [8] Effect of aging temperature and microstructure on mechanical properties of Cu-9Ni-6Sn alloy
    Jung, YC
    Lee, JM
    Han, SZ
    Kim, CJ
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1999, 63 (10) : 1338 - 1347
  • [9] The effect of iron on the microstructure and mechanical properties of a cast Cu-12Sn-1.5Ni (wt. %) alloy
    Chen, Kaixuan
    Zhang, Jiawei
    Chen, Xiaohua
    Wang, Zidong
    Shi, Rongjian
    Zhang, Aijun
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 785 (785):
  • [10] Effect of composition and aging time on hardness and wear behavior of Cu-Ni-Sn spinodal alloy
    Ilangovan, S.
    Vignesh, R. Vaira
    Padmanaban, R.
    Gokulachandran, J.
    JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2019, 26 (10) : 2634 - 2642
12345