INFLUENCE OF THE GASEOUS MEDIUM AND OF THE HEATING OF THE SUBSTRATE IN ELECTROSPARK ALLOYING ON THE FATIGUE LIMIT OF STEEL PARTS

被引:0
|
作者
BEZBAKH, NV [1 ]
DUBOVITSKAYA, NV [1 ]
POLKOVNIKOVA, TA [1 ]
SNEZHKOV, VA [1 ]
机构
[1] NIID,MOSCOW,RUSSIA
关键词
D O I
10.1007/BF00780602
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Electrospark alloying of the surface of steel parts, e.g., with chromium, is used to enhance hardness, wear resistance, corrosion resistance, and other properties. Present-day automated equipment integrated in production lines makes this method technologically fairly suitable. The article deals with the properties of steels 45 and 30KhGSA after electrospark alloying in an atmosphere of argon and air.
引用
收藏
页码:302 / 306
页数:5
相关论文
共 50 条
  • [41] Assessment of the influence of residual and mean stresses on the fatigue limit of a quenched and tempered low alloyed steel
    Bomas, H
    Linkewitz, T
    Mayr, P
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 1998, 29 (05) : 270 - 276
  • [42] Influence of thermal and thermomechanical treatments on the fatigue limit of a bainitic high-strength bearing steel
    Kerscher, Eberhard
    Lang, Karl-Heinz
    FATIGUE 2010, 2010, 2 (01): : 1731 - 1739
  • [43] Quantitative study on influence of chemical heat treatment on apparent fatigue limit of 40 Cr steel
    Gao, Yu-Kui
    Yao, Mei
    Hangkong Cailiao Xuebao/Journal of Aeronautical Materials, 2002, 22 (04): : 21 - 25
  • [44] Influence of Mn Addition on Fatigue Limit and Coaxing Effect in Ferritic Steel Containing Solute Carbon
    Uchida, Yusui
    Koyama, Motomichi
    Fukushima, Yoshihiro
    Tsuzaki, Kaneaki
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2020, 106 (06): : 112 - 122
  • [45] Influence of Mn Addition on Fatigue Limit and Coaxing Effect in Ferritic Steel Containing Solute Carbon
    Uchida, Yusui
    Koyama, Motomichi
    Fukushima, Yoshihiro
    Tsuzaki, Kaneaki
    ISIJ INTERNATIONAL, 2022, 62 (10) : 2135 - 2146
  • [46] Self-Heating Measurements for a Dual-Phase Steel under Ultrasonic Fatigue Loading for stress amplitudes below the conventional fatigue limit
    Torabian, Noushin
    Favier, Veronique
    Ziaei-Rad, Saeed
    Adamski, Frederic
    Dirrenberger, Justin
    Ranc, Nicolas
    21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21), 2016, 2 : 1191 - 1198
  • [47] INFLUENCE OF RAPID HEATING ON THE STRAIN AGING OF MEDIUM-CARBON COLD-DRAWN STEEL
    KHOLIN, AS
    ABRAMOV, AI
    ZHIRYAKOVA, IB
    RUSSIAN METALLURGY, 1978, (03): : 137 - 139
  • [48] Investigating the influence of the chamfer and fillet on the high-cyclic fatigue strength of adhesive joints of steel parts
    Zielecki, Wladyslaw
    Kubit, Andrzej
    Kluz, Rafal
    Trzepiecinski, Tomasz
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2017, 31 (06) : 627 - 644
  • [49] Comparative investigation of the fatigue limit of additive-manufactured and rolled 316 steel based on self-heating approach
    Cao, Yinfeng
    Moumni, Ziad
    Zhu, Jihong
    Zhang, Yahui
    You, Yajun
    Zhang, Weihong
    ENGINEERING FRACTURE MECHANICS, 2020, 223
  • [50] Influence of laser polishing on the high cycle fatigue strength of medium carbon AISI 1045 steel
    Aviles, R.
    Albizuri, J.
    Lamikiz, A.
    Ukar, E.
    Aviles, A.
    INTERNATIONAL JOURNAL OF FATIGUE, 2011, 33 (11) : 1477 - 1489