ANALYSIS OF DELAMINATION IN DRILLING OF BASALT FIBER REINFORCED POLYMER COMPOSITES

被引：0
|
作者：
Amuthakkannan, P. [1 ]
Manikandan, V. [1 ]
Uthayakumar, M. [1 ]
机构：
[1] Kalasalingam Univ, Dept Mech Engn, Krishnankoil 626126, India
来源：
MATERIALS PHYSICS AND MECHANICS | 2015年 / 24卷 / 01期
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fiber reinforced polymer composites are used in many engineering applications because of their low strength to weight ratio. Delamination is one of the major problems in manufacturing of the polymer composites. In this work, the delamination of acid treated basalt fiber reinforced composites was studied through drilling operation. Basalt fiber reinforced composites is prepared by using hand layup techniques with unsaturated polyester. Taguchi design of experiment was used to investigate the effects of drilling parameters such as spindle speed [2500, 2750, 3000 rpm], feed rate (0.2, 0.4, 0.6 mm/rev) and point angle (90(omicron), 118(omicron), 135(omicron)). A series of experiments based on L-9 orthogonal arrays are conducted using CNC machine and resulting delamination factor was determined. It was observed that speed and point angles are highly influencing parameters than feed rate for the delamination of the basalt fiber reinforced polymer composites.
引用
收藏
页码：1 / 8
页数：8
相关论文
共 50 条
  • [21] Ballistic and Charpy impact performance of basalt fiber reinforced polymer composites
    Yeter, Eyuep
    Deniz, Muhammet
    Dogru, Mehmet Hanifi
    Goev, Ibrahim
    POLYMER COMPOSITES, 2024, 45 (06) : 5125 - 5135
  • [22] Delamination analysis of drilling parameters on neem/banyan fiber–reinforced sawdust particulates hybrid polymer composite
    Thandavamoorthy Raja
    Yuvarajan Devarajan
    G. Dhanraj
    Saravanan Pandiaraj
    Mostafizur Rahaman
    Muthu Thiruvengadam
    Biomass Conversion and Biorefinery, 2024, 14 (9) : 10747 - 10757
  • [23] Effect of Drilling Parameters on Delamination and Hole Quality in Drilling Flax Fiber Reinforced Bio-Composites
    Lotfi, Amirhossein
    Li, Huaizhong
    Dzung Viet Dao
    SUSTAINABLE DESIGN AND MANUFACTURING 2018, KES-SDM-18, 2019, 130 : 71 - 81
  • [24] The effect of piercing and drilling processes on burr formation and delamination of aged carbon and aramid fiber-reinforced polymer composites
    Engin, Kaan Emre
    Kaya, Ali Ihsan
    Tandogan, Mahmut
    TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 2023, 47 (02) : 259 - 269
  • [25] Effect of drilling process parameters on delamination factor in drilling of pultruded glass fiber reinforced polymer composite
    Gupta, Anurag
    Vaishya, Rahul
    Kumar, Ranjeet
    Khan, K. L. A.
    Chhabra, Sandeep
    Verma, Ajay Singh
    Bharadwaj, Abhay
    MATERIALS TODAY-PROCEEDINGS, 2022, 64 : 1290 - 1294
  • [26] Augmentation of the Delamination Factor in Drilling of Carbon Fibre-Reinforced Polymer Composites (CFRP)
    Ahmad Sobri, Sharizal
    Whitehead, David
    Mohamed, Mazlan
    Mohamed, Julie Juliewatty
    Mohamad Amini, Mohd Hazim
    Hermawan, Andi
    Mat Rasat, Mohd Sukhairi
    Mohammad Sofi, Azfi Zaidi
    Wan Ismail, Wan Omar Ali Saifuddin
    Norizan, Mohd Natashah
    POLYMERS, 2020, 12 (11) : 1 - 14
  • [27] Measurement and analysis of thrust force and delamination in drilling glass fiber reinforced polypropylene composites using different drills
    Mudhukrishnan, M.
    Hariharan, P.
    Palanikumar, K.
    MEASUREMENT, 2020, 149
  • [28] Analysis and modelling of thrust force in drilling of basalt and carbon fibre-reinforced polymer (BFRP and CFRP) composites
    Gergely Magyar
    Norbert Geier
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2023, 45
  • [29] Analysis and modelling of thrust force in drilling of basalt and carbon fibre-reinforced polymer (BFRP and CFRP) composites
    Magyar, Gergely
    Geier, Norbert
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2023, 45 (06)
  • [30] Delamination analysis of drilling parameters on neem/banyan fiber-reinforced sawdust particulates hybrid polymer composite
    Raja, Thandavamoorthy
    Devarajan, Yuvarajan
    Dhanraj, G.
    Pandiaraj, Saravanan
    Rahaman, Mostafizur
    Thiruvengadam, Muthu
    BIOMASS CONVERSION AND BIOREFINERY, 2024, 14 (09) : 10747 - 10757
12345