LASER CLADDING OF MG-AL ALLOYS

被引：80
|
作者：
WANG, AA
SIRCAR, S
MAZUMDER, J
机构：
[1] Laser-Aided Materials Processing Laboratory, Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign, Urbana, 61801, IL
来源：
JOURNAL OF MATERIALS SCIENCE | 1993年 / 28卷 / 19期
关键词：
D O I：
10.1007/BF00570050
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Among rapid solidification processing methods, laser cladding is a unique and promising technique which can be used to increase the corrosion resistance of materials. This paper describes the improvement of the laser-cladding process for magnesium-based alloys and an investigation of the effect of the laser-cladding technique upon the microstructure and the corrosion resistance of magnesium-based alloys. The cladding apparatus and techniques have been adapted for magnesium cladding to overcome the oxidation and high vapour pressure-related problems. Laser-clad Mg27Al73, Mg53Al47, and Mg72Al28 have been obtained. Eutectic phases were observed in the two magnesium-rich alloys and in the interface of the aluminium-rich alloy. Polycrystalline structure was formed in Mg27Al73. Laser-clad Mg27Al73 was found to be superior to laser-clad Mg-5 wt % Zr, Mg-2 wt % Zr, cast AZ91 B and cast magnesium in corrosion properties.
引用
收藏
页码：5113 / 5122
页数：10
相关论文
共 50 条
  • [41] STUDIES ON THE SHRINKAGE CHARACTERISTICS OF BINARY MG-AL ALLOYS
    SUNDARRAJAN, S
    ROSHAN, HMD
    RAMACHANDRAN, EG
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1984, 37 (04): : 373 - 381
  • [42] Hot cracking susceptibility of binary Mg-Al alloys
    Cao, Guoping
    Kou, Sindo
    Chang, Y. Austin
    MAGNESIUM TECHNOLOGY 2006, PROCEEDINGS, 2006, : 57 - +
  • [43] Comparative study on the solution treatment of Mg-Al and Mg-Al-Ca alloys
    Han, Lihong
    Hu, Henry
    Northwood, Derek
    MAGNESIUM TECHNOLOGY 2008, 2008, : 361 - 364
  • [44] Waste Mg-Al based alloys for hydrogen storage
    Hardian, R.
    Pistidda, C.
    Chaudhary, A-L.
    Capurso, G.
    Gizer, G.
    Cao, H.
    Milanese, C.
    Girella, A.
    Santoru, A.
    Yigit, D.
    Dieringa, H.
    Kainer, K. U.
    Klassen, T.
    Dornheim, M.
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2018, 43 (34) : 16738 - 16748
  • [45] Solidification and microstructure of sand cast Mg-Al alloys
    Carlson, BE
    ADVANCED ENGINEERING MATERIALS, 2001, 3 (04) : 245 - 247
  • [46] Solid/Liquid Interfacial Energy of Mg-Al Alloys
    Manas Paliwal
    In-Ho Jung
    Metallurgical and Materials Transactions A, 2013, 44 : 1636 - 1640
  • [47] Fractography of Stress Corrosion Cracking of Mg-Al Alloys
    Nicholas Winzer
    A. Atrens
    W. Dietzel
    G. Song
    K.U. Kainer
    Metallurgical and Materials Transactions A, 2008, 39 : 1157 - 1173
  • [48] Crystallography of grain refinement in Mg-Al based alloys
    Zhang, MX
    Kelly, PM
    Qian, M
    Taylor, JA
    ACTA MATERIALIA, 2005, 53 (11) : 3261 - 3270
  • [49] GRAIN REFINEMENT OF MG-AL ALLOYS BY CARBON INOCULATION
    Huang, Yuanding
    Zheng, Xiuhua
    Liu, Bin
    Anopuo, Okechukwu
    Hort, Norbert
    Kainer, Karl Ulrich
    Kim, Gyu Seok
    MAGNESIUM TECHNOLOGY 2010, 2010, : 419 - +
  • [50] The Influence of SO2 on the Corrosion of Mg and Mg-Al Alloys
    Esmaily, M.
    Blucher, D. B.
    Lindstrom, R. W.
    Svensson, J. -E.
    Johansson, L. G.
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2015, 162 (06) : C260 - C269
12345