Measurement of surface tension of molten matte phases by an improved sessile drop method

被引：1

作者：

Hamuyuni, J. ^{[1
,2
]}

Taskinen, P. ^{[1
]}

Akdogan, G. ^{[2
]}

Bradshaw, S. M. ^{[2
]}

机构：

[1] Aalto Univ, Met Thermodynam & Modelling Res Grp, Sch Sci & Technol, Aalto, Finland

[2] Univ Stellenbosch, Dept Proc Engn, Stellenbosch, South Africa

来源：

TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY | 2012年 / 121卷 / 03期

关键词：

Surface tension; Sessile drop; Molten phases; Sulphides; Ni3S2; Cu2S; FeS;

D O I：

10.1179/1743285512Y.0000000013

中图分类号：

TD [矿业工程];

学科分类号：

0819 ;

摘要：

Surface tensions of Ni3S2, Cu2S and FeS molten phases were measured using an improved sessile drop method in an inert atmosphere of purified argon. The traditional sessile drop method was modified before measurements were obtained. The surface tension values were obtained over a wide range of temperature from their respective melting temperatures to 1300 degrees C. In the temperature range 1000-1300 degrees C, surface tension of molten Ni3S2 decreased linearly with increasing temperature. However, the surface tensions of molten FeS and Cu2S phases were approximately constant over this range of temperature.

引用

页码：173 / 177

页数：5

共 50 条

[31] VERIFICATION OF EMPIRICAL EQUATIONS IN COMPUTING SURFACE TENSION BY SESSILE-DROP METHOD
PARVATIK.KG
JOURNAL OF COLLOID AND INTERFACE SCIENCE, 1966, 22 (03) : 298 - &
[32] COMPUTATION OF SURFACE TENSION AND OF CONTACT ANGLE BY SESSILE-DROP METHOD (II)
STAICOPOLUS, DN
JOURNAL OF COLLOID SCIENCE, 1963, 18 (08): : 793 - &
[33] An improved sessile drop method for assessing the wettability of heterogeneous coal surface
Chen, Yuran
Xia, Wencheng
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2018, 40 (01) : 60 - 67
[34] The surface and interfacial tension of mercury by the sessile drop and drop weight methods
Brown, H
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 1934, 56 (07) : 2564 - 2568
[35] SURFACE-TENSION MEASUREMENT OF MOLTEN SILICON BY THE OSCILLATING DROP METHOD USING ELECTROMAGNETIC-LEVITATION
PRZYBOROWSKI, M
HIBIYA, T
EGUCHI, M
EGRY, I
JOURNAL OF CRYSTAL GROWTH, 1995, 151 (1-2) : 60 - 65
[36] DETERMINATION OF SURFACE TENSION OF MOLTEN MATERIALS - ADAPTATION OF THE PENDENT DROP METHOD
DAVIS, JK
BARTELL, FE
ANALYTICAL CHEMISTRY, 1948, 20 (12) : 1182 - 1185
[37] SURFACE TENSION AT ELEVATED TEMPERATURES .1. FURNACE AND METHOD FOR USE OF THE SESSILE DROP METHOD - SURFACE TENSION OF SILICON, IRON AND NICKEL
KINGERY, WD
HUMENIK, M
JOURNAL OF PHYSICAL CHEMISTRY, 1953, 57 (03): : 359 - 363
[38] PENDENT DROP-SESSILE DROP APPROACH FOR DETERMINATION OF SURFACE-TENSION
LAU, WY
BURNS, CM
SURFACE SCIENCE, 1972, 30 (02) : 478 - &
[39] An improved method for measuring surface tension with fiber drop analysis
Gao, L
Zeng, LJ
PROCEEDINGS OF THE SECOND INTERNATIONAL SYMPOSIUM ON INSTRUMENTATION SCIENCE AND TECHNOLOGY, VOL 1, 2002, : 251 - 256
[40] Novel Method for Surface Tension Measurement: the Drop-Bounce Method
Yifan Sun
Hiroaki Muta
Yuji Ohishi
Microgravity Science and Technology, 2021, 33

← 1 2 3 4 5 →