Energy Consumption during In-Plane Rolling

被引：0

作者：

Kal'menev, A. A. ^{[1
]}

Lukashkin, N. D. ^{[1
]}

Khlamkova, S. S. ^{[1
]}

机构：

[1] Moscow State Evening Met Inst, Moscow, Russia

来源：

RUSSIAN METALLURGY | 2008年 / 04期

关键词：

D O I：

10.1134/S0036029508040095

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The energy consumed for in-plane rolling is analyzed theoretically. The total energy consumption in a working stand a(st) is differentially considered in the form of the following terms: the energies consumed for plastic deformation a(d), friction in roll bearings a(f), and for rolling friction in work and backup rolls a(r). Analytical dependences of the specific energy consumption on the plastic-deformation and working-stand parameters are proposed. The results calculated by these dependences agree with the experimental data measured on driven roll spindles.

引用

页码：326 / 328

页数：3

共 50 条

[41] CALCULATION OF ROLL PRESSURE AND ENERGY CONSUMPTION IN HOT-ROLLING
WALLQUIST, G
JOURNAL OF THE IRON AND STEEL INSTITUTE, 1954, 177 (01): : 142 - 164
[42] Energy-shaping control of soft continuum manipulators with in-plane disturbances
Franco, Enrico
Garriga-Casanovas, Arnau
INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH, 2021, 40 (01): : 236 - 255
[43] Cell geometry effect on in-plane energy absorption of periodic honeycomb structures
F. N. Habib
P. Iovenitti
S. H. Masood
M. Nikzad
The International Journal of Advanced Manufacturing Technology, 2018, 94 : 2369 - 2380
[44] NiCoB based in-plane energy storage textile with enhanced mechanical performance
Sun, Peng
Qiu, Meijia
Mai, Wenjie
APPLIED PHYSICS LETTERS, 2022, 120 (22)
[45] Effect of Cell Geometry on Energy Absorption of Honeycombs Under In-Plane Compression
Atli-Veltin, Bilim
Gandhi, Farhan
AIAA JOURNAL, 2010, 48 (02) : 466 - 478
[46] The elastic potential energy of a thin foil deformed by an in-plane 60° dislocation
Youssef, S.
Bonnet, R.
PHILOSOPHICAL MAGAZINE, 2007, 87 (31) : 4935 - 4948
[47] In-plane density gradation of shoe midsoles for optimal energy absorption performance
Uddin, Kazi Zahir
Nguyen, Hai Anh
Nguyen, Thanh T.
Trkov, Mitja
Youssef, George
Koohbor, Behrad
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART P-JOURNAL OF SPORTS ENGINEERING AND TECHNOLOGY, 2024,
[48] Energy consumption reduction in Ring Rolling processes: A FEM analysis
Giorleo, L.
Ceretti, E.
Giardini, C.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2013, 74 : 55 - 64
[49] Reduction of Energy Consumption by Electric Rolling Stock of Quarry Railways
Kondratieva, Liliia
Overianova, Liliia
Riabov, Ievgen
Yeritsyan, Bagish
Goolak, Sergey
TRANSBALTICA XIV: TRANSPORTATION SCIENCE AND TECHNOLOGY, 2023, 2024, : 519 - 528
[50] ANALYSIS OF ENERGY-CONSUMPTION IN HOT-ROLLING MILLS
HENSEL, A
MULLER, R
NEUE HUTTE, 1992, 37 (08): : 297 - 302

← 1 2 3 4 5 →