Energy Consumption during In-Plane Rolling

被引：0

作者：

Kal'menev, A. A. ^{[1
]}

Lukashkin, N. D. ^{[1
]}

Khlamkova, S. S. ^{[1
]}

机构：

[1] Moscow State Evening Met Inst, Moscow, Russia

来源：

RUSSIAN METALLURGY | 2008年 / 04期

关键词：

D O I：

10.1134/S0036029508040095

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The energy consumed for in-plane rolling is analyzed theoretically. The total energy consumption in a working stand a(st) is differentially considered in the form of the following terms: the energies consumed for plastic deformation a(d), friction in roll bearings a(f), and for rolling friction in work and backup rolls a(r). Analytical dependences of the specific energy consumption on the plastic-deformation and working-stand parameters are proposed. The results calculated by these dependences agree with the experimental data measured on driven roll spindles.

引用

页码：326 / 328

页数：3

共 50 条

[1] The contact problem of in-plane rolling of tires on a flat road
Kim, SJ
Savkoor, AR
VEHICLE SYSTEM DYNAMICS, VOL 17, SUPPLEMENT: TYRE MODELS FOR VEHICLE DYNAMIC ANALYSIS, 1996, : 189 - 206
[2] Measurement and identification of the in-plane dynamic behaviour of a rolling tyre
La Paglia, Ivano
Rapino, Luca
Ripamonti, Francesco
Baro, Simone
Corradi, Roberto
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2024, 211
[3] The contact problem of in-plane rolling of tires on a flat road
Kim, SJ
Savkoor, AR
VEHICLE SYSTEM DYNAMICS, 1997, 27 : 189 - 206
[4] Energy Consumption in Rolling Mills.
Borgnat, D.
Fazan, B.
Revue de Metallurgie. Cahiers D'Informations Techniques, 1975, 72 (03): : 273 - 280
[5] Electrostatic Energy Harvester Design using In-plane Gap Closing and In-plane Overlap Varying Mechanisms
Jamil, Umar
Shakoor, Rana Iqtidar
2019 INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION IN INDUSTRY (ICRAI), 2019,
[6] In-plane low thermal expansion of NiTi via controlled cross rolling
Li, Qiao
Deng, Zhongzheng
Onuki, Yusuke
Wang, Wei
Li, Laifeng
Sun, Qingping
ACTA MATERIALIA, 2021, 204
[7] Northlights or in-plane rooflights? Thermal energy comparison
Kendrick, Christopher
Ogden, Ray
Wang, Xiaoxin
Walliman, Nicholas
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-ENERGY, 2012, 165 (03) : 149 - 158
[8] Dynamics of in-plane arch rocking: an energy approach
DeJong, M. J.
Ochsendorf, J. A.
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-ENGINEERING AND COMPUTATIONAL MECHANICS, 2010, 163 (03) : 179 - 186
[9] Minimum energy strategies for the in-plane behaviour of masonry
Gesualdo, Antonio
Calderoni, Bruno
Iannuzzo, Antonino
Fortunato, Antonio
Monaco, Michela
FRATTURA ED INTEGRITA STRUTTURALE, 2020, Gruppo Italiano Frattura (51): : 376 - 385
[10] Comparison of energy dissipation in the out-of-plane and in-plane fracture of paper
Tanaka, A
Kettunen, H
Niskanen, K
Keitaanniemi, K
JOURNAL OF PULP AND PAPER SCIENCE, 2000, 26 (11): : 385 - 390

← 1 2 3 4 5 →