Analysis and in-plane shear characterization of polyester plain fabric by yarn pull-out method

被引：0
|
作者：
Kadir Bilisik
机构：
[1] Erciyes University,Department of Textile Engineering, Engineering Faculty
来源：
Fibers and Polymers | 2013年 / 14卷
关键词：
Fabric shear; Single and multiple yarn pull-outs; Shear rigidity; Fabric sample sizes; Pull-out fixture;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The aim of this study was to determine the in-plane shear properties of polyester fabric by the pull-out method and analytical relations were developed to calculate the shearing properties. After the yarn in the fabric was pulled from the top ravel region before the start of the crimp extension stage, it was found that fabric shear strength and rigidity increased when the number of pulled ends increased. In addition, when the fabric width and length increased, fabric shear strength and rigidity increased. On the other hand, the shear strength and rigidity values in untreated fabric were high compared to that of treated fabric due to the fabric treatments by softening agent. It was observed that fabric sample dimensions and the number of pull-out ends as well as the fabric treatments influenced fabric shear strength and rigidity. Also, the shear jamming angles were found to be based on the number of pulled ends. Fabric local shearing properties could be identified by pulling the yarn ends in various regions of the fabric. This could be important for the handling of the fabric during formation. The results generated from this study showed that polyester fabric shear could be measured by the yarn pull-out test.
引用
收藏
页码：473 / 481
页数：8
相关论文
共 50 条
  • [41] Experimental determination of yarn pull-out properties of para-aramid (Kevlar®) woven fabric
    Bilisik, Kadir
    JOURNAL OF INDUSTRIAL TEXTILES, 2012, 41 (03) : 201 - 221
  • [42] Stick-slip behavior of para-aramid (Twaron®) fabric in yarn pull-out
    Bilisik, Kadir
    TEXTILE RESEARCH JOURNAL, 2013, 83 (01) : 13 - 33
  • [43] Mechanical property analysis of yarn pull-out from aramid plain woven fabrics based on micro-geometry
    Ma Y.
    Liu Y.
    Zhao Y.
    Chen X.
    Lu S.
    Hu H.
    Fangzhi Xuebao/Journal of Textile Research, 2022, 43 (04): : 47 - 54
  • [44] Behavior of Pull-Out and Movement Mechanisms of High-Performance Plain Weave Fabric Yarns
    Chen J.
    Wu S.
    Zhang R.
    Chen W.
    Fan J.
    Wang M.
    Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 2022, 56 (04): : 464 - 473
  • [45] Multiple Yarn Pull-out Response on E-Glass Twill 4/1 Woven Fabric
    Zulkifli, Nasrun Faris
    Yahya, Faizul
    Ahmad, Rozi
    Abd Ghani, Suzaini
    INTERNATIONAL TRANSACTION JOURNAL OF ENGINEERING MANAGEMENT & APPLIED SCIENCES & TECHNOLOGIES, 2021, 12 (09):
  • [46] Properties of stick-slip stage of yarn pull-out in para-aramid woven fabric
    Kadir Bilisik
    Bekir Yildirim
    Fibers and Polymers, 2013, 14 : 630 - 638
  • [47] Properties of Stick-Slip Stage of Yarn Pull-Out in Para-Aramid Woven Fabric
    Bilisik, Kadir
    Yildirim, Bekir
    FIBERS AND POLYMERS, 2013, 14 (04) : 630 - 638
  • [48] In-plane shear behaviour of earthen materials panels strengthened with polyester fabric strips
    Miccoli, L.
    Fontana, P.
    Mueller, U.
    STRUCTURAL ANALYSIS OF HISTORICAL CONSTRUCTIONS: ANAMNESIS, DIAGNOSIS, THERAPY, CONTROLS, 2016, : 1099 - 1105
  • [49] Multilayered and Multidirectionally-stitched aramid Woven Fabric Structures: Experimental Characterization of Ballistic Performance by Considering the Yarn Pull-out Test
    Bilisik, K.
    Korkmaz, M.
    TEXTILE RESEARCH JOURNAL, 2010, 80 (16) : 1697 - 1720
  • [50] The influence of yarn fineness and number of yarn layers on in-plane shear properties of 3-D woven fabric
    Guan, Liuxiang
    Li, Jialu
    Jiao, Ya'nan
    ADVANCED COMPOSITES LETTERS, 2020, 29 (29)
12345