Quantifying Interfacial Friction in Cold Forming using Forward Rod Backward Cup Extrusion Test

被引：1

作者：

Velu, R. ^{[1
]}

Cecil, M.R. ^{[2
]}

机构：

[1] Department of Mechanical Engineering, Dr. M. G. R. University, E. V. R. Salai, Chennai,600 095, India

[2] Design & Development Division, Integral Coach Factory, Chennai,600 038, India

来源：

Journal of The Institution of Engineers (India): Series C | 2012年 / 93卷 / 02期

关键词：

13;

D O I：

10.1007/s40032-012-0018-0

中图分类号：

学科分类号：

摘要：

Interfacial friction plays a vital role in cold forming and forging. Since this interfacial friction, if uncontrolled, would lead to many defects and problems, it is essential to measure this entity and to overcome it. Using forward rod backward cup extrusion test, this interfacial friction is quantified. A circular billet made of aluminium alloy 6063 is extruded to form a rod on one side and a cup on the other. The ratio of the height of the cup to the rod depth is a measure of the friction. Simulations have been carried out for various combinations of height/diameter of the billet and for different punch diameter to rod diameter ratios. The cup height to rod depth ratios have been calculated for the above combinations and those ratios were plotted to form calibration curves. Subsequently, the tests have been carried out for different friction conditions applying various lubricants. By plotting the values obtained during the tests on the calibration curves, the friction present during the cold forming process is quantified.

引用

页码：157 / 161

页数：4

共 50 条

[21] Measurement of friction coefficient by backward extrusion with rotating tool under severe forming conditions
Sawamura, Masatoshi
Yogo, Yasuhiro
Kamiyama, Michiaki
Iwata, Noritoshi
11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 2014, 81 : 1866 - 1871
[22] A theoretical and experimental study of friction in metal forming by the use of the forward extrusion process
Bakhshi-Koybari, M
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 125 : 369 - 374
[23] Piercing and Surface-Crack Defects in Cold Combined Forward-Backward Extrusion
Lin, Heng-Sheng
Lee, Chien-Yu
Li, Wen-Shun
APPLIED SCIENCES-BASEL, 2021, 11 (09):
[24] A critical evaluation of the double cup extrusion test for selection of cold forging lubricants
Schrader, Timothy
Shirgaokar, Manas
Altan, Taylan
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 189 (1-3) : 36 - 44
[25] Forming of magnesium alloy cup using friction heated punch
Yasunori, Harada
Taiki, Takahara
20TH METAL FORMING INTERNATIONAL CONFERENCE, METAL FORMING 2024, 2024, 44 : 340 - 349
[26] A design method for cold backward extrusion using FE analysis
Hur, KD
Choi, Y
Yeo, HT
FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2003, 40 (02) : 173 - 185
[27] Experimental and numerical study of optimal die profile in cold forward rod extrusion of aluminum
Noorani-Azad, M
Bakhshi-Jooybari, M
Hosseinipour, SJ
Gorji, A
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 164 : 1572 - 1577
[28] A METHOD FOR EVALUATING FRICTION USING A BACKWARD EXTRUSION-TYPE FORGING
SHEN, G
VEDHANAYAGAM, A
KROPP, E
ALTAN, T
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1992, 33 (1-2) : 109 - 123
[29] Numerical analysis on the extruded volume and length ratios of backward tube to forward rod in combined extrusion processes
Ham, B. S.
Ok, J. H.
Seo, J. M.
Hwang, B. B.
Min, K. H.
Koo, H. S.
ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY, 2006, 519-521 : 919 - 924
[30] Evaluation of palm oil as cold forging lubricant of aluminium A1100 using double cup extrusion test
Afifah, A. N.
Syahrullail, S.
Rahim, E. A.
PROCEEDINGS OF ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY 2018 (ASIATRIB 2018), 2018, : 493 - 494

← 1 2 3 4 5 →