Comparative study on the corrosion behavior of the cold rolled and hot rolled low-alloy steels containing copper and antimony in flue gas desulfurization environment

被引：1
|
作者：
S. A. Park
J. G. Kim
Y. S. He
K. S. Shin
J. B. Yoon
机构：
[1] Sungkyunkwan University,Department of Advanced Materials Engineering
[2] Changwon National University,School of Nano Materials Engineering
[3] POSCO Technical Research Lab.,undefined
来源：
The Physics of Metals and Metallography | 2014年 / 115卷
关键词：
cold rolled steel; hot rolled steel; corrosion; inclusion; grain refinement; grain orientation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The correlation between the corrosion and microstructual characteristics of cold rolled and hot rolled low-alloy steels containing copper and antimony was established. The corrosion behavior of the specimens used in flue gas desulfurization systems was examined by electrochemical and weight loss measurements in an aggressive solution of 16.9 vol % H2SO4 + 0.35 vol % HCl at 60°C, pH 0.3. It has been shown that the corrosion rate of hot rolled steel is lower than that of cold rolled steel. The corrosion rate of cold rolled steel was increased by grain refinement, inclusion formation, and preferred grain orientation.
引用
收藏
页码：1285 / 1294
页数：9
相关论文
共 50 条
  • [1] Comparative study on the corrosion behavior of the cold rolled and hot rolled low-alloy steels containing copper and antimony in flue gas desulfurization environment
    Park, S. A.
    Kim, J. G.
    He, Y. S.
    Shin, K. S.
    Yoon, J. B.
    PHYSICS OF METALS AND METALLOGRAPHY, 2014, 115 (13): : 1285 - 1294
  • [2] Effect of antimony on the corrosion behavior of low-alloy steel for flue gas desulfurization system
    Le, D. P.
    Ji, W. S.
    Kim, J. G.
    Jeong, K. J.
    Lee, S. H.
    CORROSION SCIENCE, 2008, 50 (04) : 1195 - 1204
  • [3] Comparison of Corrosion Behavior of Low-Alloy Steel Containing Copper and Antimony with 409L Stainless Steel for a Flue Gas Desulfurization System
    Park, Sun-Ah
    Shin, Su-Bin
    Kim, Jung-Gu
    KOREAN JOURNAL OF METALS AND MATERIALS, 2016, 54 (07): : 492 - 502
  • [4] TEM study the corrosion behavior of the low alloy steels developed for flue gas desulfurization system
    He, Yinsheng
    Yoo, Keun-Bong
    Park, Joong Cheul
    Lee, Byung-Ho
    Yoon, Jeong-Bong
    Kim, Jung-Gu
    Shin, Keesam
    MATERIALS CHARACTERIZATION, 2018, 142 : 540 - 549
  • [5] MICROSTRUCTURAL AND CHEMICAL BANDING IN HOT-ROLLED LOW-ALLOY STEELS
    BRITTAIN, JR
    HOWELL, PR
    JOURNAL OF METALS, 1983, 35 (08): : A51 - A51
  • [6] Alloying effect of copper on the corrosion properties of low-alloy steel for flue gas desulfurization system
    Kim, Seon-Hong
    Park, Sun-Ah
    Kim, Jung-Gu
    Shin, Kee-Sam
    He, Yinsheng
    METALS AND MATERIALS INTERNATIONAL, 2015, 21 (02) : 232 - 241
  • [7] Alloying effect of copper on the corrosion properties of low-alloy steel for flue gas desulfurization system
    Seon-Hong Kim
    Sun-Ah Park
    Jung-Gu Kim
    Kee-Sam Shin
    Yinsheng He
    Metals and Materials International, 2015, 21 : 232 - 241
  • [8] A Method to Estimate the Microstructures of Low-Alloy Cold-Rolled TRIP Steels
    Fu, Bo
    Sun, Xiaoyang
    Yang, Wangyue
    Li, Longfei
    Zhao, Zhenye
    STEEL RESEARCH INTERNATIONAL, 2018, 89 (02)
  • [9] Crevice Corrosion Behavior of Stainless Steels in a Flue Gas Desulfurization Environment
    Hu, Yong
    Zhang, Hao
    Zhang, HuiYing
    Ouyang, MingHui
    Hu, YongQi
    Wang, LiHua
    Chu, Cheng
    Wang, JingChao
    Wang, JingTang
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (23) : 10567 - 10581
  • [10] Crevice Corrosion Behavior of Stainless Steels in a Flue Gas Desulfurization Environment
    Yong Hu
    Hao Zhang
    HuiYing Zhang
    MingHui Ouyang
    YongQi Hu
    LiHua Wang
    Cheng Chu
    JingChao Wang
    JingTang Wang
    Journal of Materials Engineering and Performance, 2023, 32 : 10567 - 10581
12345