The Interactions Between Sulfur-Nitrided Layer on Steel Surface and MoDTC Lubricating Additive and Their Effects on Tribological Performance

被引：0
|
作者：
Chunyue Liu
Wen Yue
Chengbiao Wang
Xiaocheng Gao
Xuejie Sun
Jiajun Liu
机构：
[1] China University of Geosciences (Beijing),School of Engineering and Technology
[2] Beijing Foton Cummins Engine Company Ltd.,Department of Mechanical Engineering
[3] Tsinghua University,undefined
来源：
Tribology Letters | 2012年 / 47卷
关键词：
Surface modification; Friction modifiers; Friction; Wear;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Low temperature ion sulfuration and ion nitriding technologies were used to treat AISI 52100 steel. The tribological behaviors of the treated surface were investigated under lubrication with different MoDTC additive concentration. The morphologies and composition of worn surfaces were observed, and the valence states of tribofilm were identified. The results showed that the sulfur-nitrided surface was obviously improved in the friction-reducing property and exhibited the best synergistic effect when the concentration of MoDTC reached 1.0 %. The main reason is that MoS2 and FeS were formed on the worn sulfur-nitrided surface.
引用
收藏
页码：313 / 322
页数：9
相关论文
共 30 条
  • [21] Structural Transformations and Tribological Effects in the Surface Layer of Austenitic Chrome-Nickel Steel Initiated by Nanostructuring and Oxidation
    L. G. Korshunov
    N. L. Chernenko
    Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques, 2020, 14 : 632 - 638
  • [22] Elastohydrodynamic analysis of multistep texture effects and partial surface roughness on the tribological performance of steel journal bearings
    Muchammad, Muchammad
    Tauviqirrahman, Mohammad
    Rizki, Yusuf Muhammad
    Syafaat, Imam
    Maharani, Farikha
    Ammarullah, Muhammad Imam
    DISCOVER APPLIED SCIENCES, 2025, 7 (04)
  • [23] Fatigue behavior of additive manufactured 316L stainless steel parts: Effects of layer orientation and surface roughness
    Shrestha, Rakish
    Simsiriwong, Jutima
    Shamsaei, Nima
    ADDITIVE MANUFACTURING, 2019, 28 : 23 - 38
  • [24] Effects of functionally graded TiN layer and deposition temperature on the structure and surface properties of TiCN coating deposited on plasma nitrided H13 steel by PACVD method
    Damerchi, Elyad
    Abdollah-zadeh, Amir
    Poursalehi, Reza
    Mehr, Mahtab Salari
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 772 : 612 - 624
  • [25] Numerical investigation of the surface and microstructure effects on the high cycle fatigue performance of additive manufactured stainless steel 316L
    Liang, Xiaoyu
    Robert, Camille
    Hor, Anis
    Morel, Franck
    INTERNATIONAL JOURNAL OF FATIGUE, 2021, 149
  • [26] Effect of interactions between Co2+ and surface goethite layer on the performance of α-FeOOH coated hollow fiber ceramic ultrafiltration membranes
    Zhu, Zhiwen
    Zhu, Li
    Li, Jianrong
    Tang, Jianfeng
    Li, Gang
    Hsieh, Yi-Kong
    Wang, TsingHai
    Wang, Chu-Fang
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2016, 466 : 28 - 35
  • [27] Interactions Between Protein Molecules and the Virus Removal Membrane Surface: Effects of Immunoglobulin G Adsorption and Conformational Changes on Filter Performance
    Hamamoto, Ryo
    Ito, Hidemi
    Hirohara, Makoto
    Chang, Ryongsok
    Hongo-Hirasaki, Tomoko
    Hayashi, Tomohiro
    BIOTECHNOLOGY PROGRESS, 2018, 34 (02) : 379 - 386
  • [28] The Effects of High-Energy Composite Surface Layer Modification on the Impact Performance of the H13 Steel Cutter Ring for Shield Tunneling Machine
    Xu, Huanbin
    Li, Yi
    Xu, Zhilong
    Cheng, Jun
    Chen, Xiuyu
    Jiang, Qingshan
    Chen, Junying
    Zhao, Zhenye
    COATINGS, 2023, 13 (09)
  • [29] Development of a method for the measurement of Interactions between protein molecules and the virus removal membrane surface: effects of immunoglobulin G adsorption on filter performance
    Hamamoto, Ryo
    Hongo-Hirasaki, Tomoko
    Hayashi, Tomohiro
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2019, 257
  • [30] Probing synergetic effects between platinum nanoparticles deposited via atomic layer deposition and a molybdenum carbide nanotube support through surface characterization and device performance
    Saha, Shibely
    Martin, Bridger
    Leonard, Brian
    Li, Dongmei
    JOURNAL OF MATERIALS CHEMISTRY A, 2016, 4 (23) : 9253 - 9265
123