Non-uniformly scaled buckling modes of reinforcing elements in fiber reinforced plastic

被引:1
|
作者
Paimushin V.N. [1 ]
Polyakova N.V. [2 ,3 ]
Kholmogorov S.A. [2 ,3 ]
Shishov M.S. [2 ,3 ]
机构
[1] Kazan National Research Technical University named after A. N. Tupolev, ul. K. Marksa 10, Kazan
[2] Kazan Federal University, ul. Kremlyovskaya 18, Kazan
[3] Kazan Federal University, ul. Kremlyovskaya 18, Kazan
基金
俄罗斯基础研究基金会;
关键词
buckling load; buckling modes; epoxy; fiber; fiber reinforced plastic; linearized equations; specimen; tension–compression; wave parameter;
D O I
10.3103/S1066369X17090092
中图分类号
学科分类号
摘要
We consider a problem about non-uniformly scaled buckling modes of isolated fiber (without accounting of interaction with the surrounding epoxy) or bundle of fibers, which are structural elements of fiber reinforced plastics under the transverse tension (compression) and shear stresses in prebuckling state. Such initial state is formed in fibers and bundles of fibers at tension-compression tests of flat specimens from cross ply composites with unidirectional fibers. For problem statement we use equations recently constructed by reduction of consistent version of geometrically nonlinear equations of theory of elasticity to one dimensional equations of rectilinear beams. Equations are based on refined shear S. P. Timoshenko model with accounting of tension-compression stresses in transverse directions. We give theoretical explanation of developed phenomenon as reducing shear modulus of elasticity of fiber reinforced plastic during the increasing of shear strains. We show that under the loading process of specimens under review uninterruptedly structure reconstruction of composite trough implementation and uninterruptedly changing of internal buckling modes at changing wave parameter is feasible. © 2017, Allerton Press, Inc.
引用
收藏
页码:79 / 84
页数:5
相关论文
共 50 条
  • [41] Ductile hybrid fiber reinforced plastic reinforcing bar for concrete structures: Design methodology
    Somboonsong, W
    Ko, FK
    Harris, HG
    ACI MATERIALS JOURNAL, 1998, 95 (06) : 655 - 666
  • [42] Coupling efficiency of non-uniformly correlated beams into a single-mode fiber in turbulence (Invited)
    Lin S.
    Zhang J.
    Zhu X.
    Wang F.
    Cai Y.
    Yu J.
    Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering, 2020, 49 (12):
  • [43] Investigation of Buckling Modes of Sandwich Specimens with Facing Layers from [0°]s Fiber-Reinforced Plastic under Axial Compression
    Paimushin, V. N.
    Kholmogorov, S. A.
    Olyakova, N. V. P.
    Shishov, M. A.
    UCHENYE ZAPISKI KAZANSKOGO UNIVERSITETA-SERIYA FIZIKO-MATEMATICHESKIE NAUKI, 2019, 161 (04): : 569 - 590
  • [44] The free vibration analysis of a cantilever trapezoidal plate with non-uniform thickness reinforced with non-uniformly distributed nanofillers
    Amirabadi, Hossein
    Afshari, Hassan
    Darakhsh, Arashk
    Sarafraz, Mirsalman
    JOURNAL OF VIBRATION AND CONTROL, 2024, 30 (21-22) : 4764 - 4782
  • [45] Local buckling of composite fiber-reinforced plastic wide-flange sections
    Qiao, PZ
    Zou, GP
    JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 2003, 129 (01): : 125 - 129
  • [46] Buckling behavior of fiber reinforced plastic-metal hybrid-composite beam
    Eksi, Secil
    Kapti, Akin O.
    Genel, Kenan
    MATERIALS & DESIGN, 2013, 49 : 130 - 138
  • [47] Thermo-mechanical buckling analysis of non-uniformly heated rectangular plates with temperature-dependent material properties
    Ren, Yongan
    Huo, Ruili
    Zhou, Ding
    THIN-WALLED STRUCTURES, 2023, 186
  • [48] Layered Finite Element (FE) modelling of structural concrete beams non-uniformly reinforced with carbon textile fabrics
    El Kadi, M.
    Nahum, L.
    Peled, A.
    Tysmans, T.
    MATERIALS AND STRUCTURES, 2021, 54 (05)
  • [49] Dynamic and buckling response modelling of functionally graded graphene oxide powder(GOP) reinforced cylindrical panels : Influence of GOP grading and non-uniformly, partially distributed edge loads
    Twinkle, C. M.
    Pitchaimani, Jeyaraj
    STRUCTURES, 2022, 40 : 840 - 854
  • [50] Layered Finite Element (FE) modelling of structural concrete beams non-uniformly reinforced with carbon textile fabrics
    M. El Kadi
    L. Nahum
    A. Peled
    T. Tysmans
    Materials and Structures, 2021, 54