Roundness error evaluation of cold embossed hole based on profile measurement technique

被引：0
|
作者：
A. B. Abdullah
S. M. Sapuan
Z. Samad
机构：
[1] Universiti Sains Malaysia,School of Mechanical Engineering
[2] Universiti Putra Malaysia,Department of Mechanical and Manufacturing Engineering, Faculty of Engineering
来源：
The International Journal of Advanced Manufacturing Technology | 2015年 / 80卷
关键词：
Roundness; Cold embossing; Profile measurement;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Roundness is one of the main features to ensure the perfect mating of assembled parts. A coordinate measurement machine is commonly utilized for measurement, but the use of this machine is limited because of the small size and characteristics of the hole. This study aims to evaluate the quality of an AA6061 cold embossing hole. A simple approach based on profile deviation is proposed to evaluate the roundness of the hole. The profile is obtained with the use of InfiniteFocus Alicona system, a commercially available 3D surface measurement technique. Several specimens with various depths and diameters are prepared for measurement. Results are validated with the commercial Mitutoyo roundtest machine.
引用
收藏
页码：293 / 300
页数：7
相关论文
共 50 条
  • [31] Minimum Zone Evaluation for Roundness Error Based on Geometric Approximating Searching Algorithm
    X. Q. Lei
    W. M. Pan
    X. P. Tu
    S. F. Wang
    MAPAN, 2014, 29 : 143 - 149
  • [32] Evaluation of roundness error using a new method based on a small displacement screw
    Nouira, Hichem
    Bourdet, Pierre
    MEASUREMENT SCIENCE AND TECHNOLOGY, 2014, 25 (04)
  • [33] A Novel Iterative-Based Field Search Technique for Roundness Evaluation
    Singh, Deep
    Arunachalam, N.
    Srinivasu, D. S.
    49TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 49, 2021), 2021, 53 : 268 - 275
  • [34] Profile Measurement Error Processing Based on the Wavelet Transform
    Lu, Dongfang
    Liu, Qihan
    Zhang, Lifu
    2011 INTERNATIONAL CONFERENCE ON FUTURE COMPUTER SCIENCE AND APPLICATION (FCSA 2011), VOL 1, 2011, : 89 - 92
  • [35] ON THE PREDICTION OF THE ROUNDNESS ERROR IN BTA DEEP HOLE MACHINING BASED ON THE STOCHASTIC DESCRIPTION OF THE CUTTING TOOL MOTION.
    Chandrashekhar, S.
    Ahmad, Z.
    Sankar, T.S.
    Osman, M.O.M.
    International Journal of Production Research, 1986, 24 (04): : 879 - 899
  • [36] ON THE PREDICTION OF THE ROUNDNESS ERROR IN BTA DEEP HOLE MACHINING BASED ON THE STOCHASTIC DESCRIPTION OF THE CUTTING-TOOL MOTION
    CHANDRASHEKHAR, S
    AHMAD, Z
    SANKAR, TS
    OSMAN, MOM
    INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 1986, 24 (04) : 879 - 899
  • [37] Development of a roundness profile measurement system for parallel rollers based on a V-block method
    Goho, K
    Mitui, K
    Hayashi, A
    JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, 1999, 42 (02): : 410 - 415
  • [38] Advances in Measurement and Error Evaluation Technique of Optical Freeform Surfaces
    Wang S.
    Kong L.
    Lü H.
    Guangxue Xuebao/Acta Optica Sinica, 2023, 43 (08):
  • [39] Advances in Measurement and Error Evaluation Technique of Optical Freeform Surfaces
    Wang Shixiang
    Kong Lingbao
    Lu Haoyu
    ACTA OPTICA SINICA, 2023, 43 (08)
  • [40] Roundness error separation based on singularity detection and exact-stop of spindle in on-machine measurement of spindle rotation error
    Kong, Gang
    Zong, Zhijian
    Yang, Jianzhong
    Chen, Jihong
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2022, 171
12345