Roundness error evaluation of cold embossed hole based on profile measurement technique

被引：0
|
作者：
A. B. Abdullah
S. M. Sapuan
Z. Samad
机构：
[1] Universiti Sains Malaysia,School of Mechanical Engineering
[2] Universiti Putra Malaysia,Department of Mechanical and Manufacturing Engineering, Faculty of Engineering
来源：
The International Journal of Advanced Manufacturing Technology | 2015年 / 80卷
关键词：
Roundness; Cold embossing; Profile measurement;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Roundness is one of the main features to ensure the perfect mating of assembled parts. A coordinate measurement machine is commonly utilized for measurement, but the use of this machine is limited because of the small size and characteristics of the hole. This study aims to evaluate the quality of an AA6061 cold embossing hole. A simple approach based on profile deviation is proposed to evaluate the roundness of the hole. The profile is obtained with the use of InfiniteFocus Alicona system, a commercially available 3D surface measurement technique. Several specimens with various depths and diameters are prepared for measurement. Results are validated with the commercial Mitutoyo roundtest machine.
引用
收藏
页码：293 / 300
页数：7
相关论文
共 50 条
  • [1] Roundness error evaluation of cold embossed hole based on profile measurement technique
    Abdullah, A. B.
    Sapuan, S. M.
    Samad, Z.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 80 (1-4): : 293 - 300
  • [2] Quality Evaluation of Cold Embossed Hole Based on Profile Measurement Technique
    Abdullah, A. B.
    Sapuan, S. M.
    Samad, Z.
    Aziz, N. A.
    ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY, 2012, 626 : 564 - +
  • [3] Roundness Measurement and Error Separation Technique
    Ma Yu-zhen
    Wang Xin-hua
    Kang Yan-hui
    Dong Xiao
    SENSORS, MEASUREMENT AND INTELLIGENT MATERIALS, PTS 1-4, 2013, 303-306 : 390 - +
  • [4] Evaluation of roundness error based on the position of the centers
    Zhao Shizhen
    Li Xiuming
    MECHANICAL ENGINEERING, MATERIALS SCIENCE AND CIVIL ENGINEERING II, 2014, 470 : 420 - +
  • [5] The method of roundness profile precious measurement based on high-level removing eccentric error
    Heng, Zhang
    4th International Symposium on Instrumentation Science and Technology (ISIST' 2006), 2006, 48 : 169 - 172
  • [6] A new error separation technique used in nanometer accuracy roundness measurement
    Tan, J
    Pan, R
    PRECISION ENGINEERING, NANOTECHNOLOGY, VOL. 2, 1999, : 196 - 199
  • [7] Roundness evaluation based on profile confidence level
    Jiang, QM
    OuYang, DS
    Feng, HY
    Desta, MT
    TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME, VOL 32, 2004, 2004, : 127 - 134
  • [8] Roundness Error Evaluation Based on Differential Evolution Algorithm
    Jin, Long
    Chen, Yueping
    Lu, Haiyan
    Li, Shuping
    Chen, Yi
    APPLIED MECHANICS, MATERIALS AND MANUFACTURING IV, 2014, 670-671 : 1285 - 1289
  • [9] Evaluation of roundness error from coordinate data using curvature technique
    Li Xiuming
    Shi Zhaoyao
    MEASUREMENT, 2010, 43 (02) : 164 - 168
  • [10] Roundness Error Measurement of Shaft Parts Based on Virtual Instrument
    Jiang, Feng Guo
    Zhu, Bin
    Wang, Yan Tao
    Liu, Peng
    MANUFACTURING ENGINEERING AND AUTOMATION II, PTS 1-3, 2012, 591-593 : 2595 - 2598
12345